Every FPV pilot crashes eventually. The question is whether your camera, antenna, and GPS module survive the impact or end up scattered across the field. That is where TPU mounts come in. They are the flexible, vibration-dampening parts that sit between your expensive electronics and the brutal reality of concrete, trees, and dirt.
I have spent the last several months testing and researching the best TPU mounts for FPV drones, comparing pre-made options from Amazon against the community knowledge from r/fpv and the major FPV retailers. What I found is that the right mount can save your gear dozens of times before it needs replacing, while the wrong one rips apart on the first hard landing.
This guide covers twelve TPU mounts for FPV drones that span every common need, from complete mounting kits and adjustable action camera holders to GPS module brackets and antenna tail mounts. Whether you fly freestyle, race, or build cinewhoops, you will find a recommendation here that fits your frame and flying style.
Table of Contents
Top 3 Picks for Best TPU Mounts for FPV Drones in 2026
Not everyone wants to read through twelve reviews before buying. Here are the three TPU mounts that stood out the most during my research, each earning its spot for a different reason.
The VBESTLIFE kit takes the top spot because it gives you a complete mounting solution in one package. The QY3D mount wins on value for pilots who already run a Runcam Thumb Pro. The QWinOut antenna mount earns the top rated badge for its perfect 5-star feedback and iFlight frame compatibility.
VBESTLIFE RC FPV Mounting Base Kit
- Complete kit with motor bases
- Full camera and antenna mounts
- Lightweight at 25g total
- Precision 3D printed fit
QY3D TPU Camera Mount Runcam Thumb Pro
- Converts Thumb Pro to GoPro mount
- Compact 60x42x29mm
- Available in 3 colors
- Flexible TPU construction
QWinOut TPU Antenna Mount iFlight
- Perfect 5-star reviews
- Snug antenna hold
- Compatible with iFlight frames
- Custom FPV fit
Best TPU Mounts for FPV Drones in September 2026
Here is a quick side-by-side comparison of all twelve mounts I cover in this guide. Use this table to scan features and compatibility at a glance, then jump to the full review for any product that catches your eye.
| Product | Specifications | Action |
|---|---|---|
| VBESTLIFE FPV Mounting Base Kit |
|
Check Latest Price |
| QY3D TPU Camera Mount |
|
Check Latest Price |
| QWinOut TPU Antenna Mount |
|
Check Latest Price |
 UAZNJFZ M80 Pro GPS TPU Holder |
|
Check Latest Price |
 DTWLOPOP TPU Mount for APEX HD |
|
Check Latest Price |
 RBoand Adjustable TPU Camera Mount |
|
Check Latest Price |
 FEICHAO Thumb Camera TPU Frame |
|
Check Latest Price |
 SwiPle TPU Bracket Naked GP9-12 |
|
Check Latest Price |
 Shuaichi GPS Mount Pavo20 Pro |
|
Check Latest Price |
 FTYUERT BN-220 GPS TPU Mount |
|
Check Latest Price |
 HYFBMTD GoPro Naked TPU Seat |
|
Check Latest Price |
 Generic TPU Camera Lens Cover |
|
Check Latest Price |
1. VBESTLIFE RC FPV Quadcopter Mounting Base Kit – Complete Mounting Solution
RC FPV Quadcopter Mounting Base Kit, 3D Printed Motor Camera Antenna Mounts for FPV Drone Protection Lightweight Frame Accessorie (Black)
Complete kit: 4 motor bases
1 camera base
1 antenna mount
25g total weight
3D printed TPU
Pros
- Complete mounting solution in one package
- Precision 3D printed with exact fit
- Lightweight protective design at 25g
- Easy installation without modifications
Cons
- Some customers report missing pieces
- Limited color options
When I first looked at the VBESTLIFE kit, what jumped out was the sheer completeness of the package. You get four motor soft mounts, one camera base, and one antenna mount all in a single purchase. That is rare on Amazon, where most TPU listings sell you one specific part and leave you hunting for the rest.
The kit weighs just 25 grams total, which matters a lot on a 5-inch freestyle build where every gram affects flight characteristics. I appreciate that the components are precision 3D printed with chamfered edges and polished surfaces, giving them a clean look that does not scream cheap knockoff.
Installation is straightforward with no modifications needed. The bases fit standard FPV drone configurations, and the kit covers the three most common mounting needs in one go. Reviewers who left feedback praised the fit and finish, though a few reported missing pieces in their packages.
The 4.0-star average across 6 reviews tells me the product works well when you get a complete kit. The rating distribution shows 43 percent five-star and 35 percent four-star ratings, with the lower scores tied mainly to missing components rather than quality issues.
Who should buy this kit
This kit is perfect for pilots building a new 5-inch freestyle or racing drone who want all their TPU mounts from one source. If you are tired of ordering camera mounts, antenna mounts, and motor soft mounts separately, this bundle saves you time and shipping costs.
It also works well for pilots who want matching TPU parts across their build rather than mixing brands and colors. The uniform black finish keeps your drone looking clean.
What to watch out for
The main risk is missing pieces, which a small number of buyers reported. I recommend checking the package contents against the listing as soon as it arrives and contacting the seller immediately if anything is missing.
The kit is also only available in black, so if you color-code your TPU parts by function (a common practice in the FPV community), you will not have that option here.
2. QY3D TPU Camera Mount for Runcam Thumb Pro to GoPro – Best Value Convertor
QY3D TPU Camera Mount for Converting Runcam Thumb Pro to Gopro Mount (Green)
Converts Thumb Pro to GoPro mount
TPU material
60x42x29mm
Available in Yellow, Green, Red
Pros
- Converts Runcam Thumb Pro to GoPro mount
- Available in multiple bright colors
- Compact and lightweight
- TPU provides flexibility and durability
Cons
- Some concerns about design licensing
- No prime shipping
The QY3D mount solves a specific problem that many Thumb Pro owners face: how do you mount a Runcam Thumb Pro on a frame designed for a GoPro? This little TPU adapter bridges that gap cleanly, and at under eight dollars it is one of the most affordable purpose-built mounts on this list.
I like that it comes in yellow, green, and red. Bright colors are not just about aesthetics for FPV pilots. A brightly colored camera mount makes your drone easier to spot when you crash into tall grass or bushes, which is a practical consideration that experienced pilots appreciate.
The mount measures 60 by 42 by 29 millimeters, making it compact enough for most 3-inch to 5-inch builds. The TPU material provides the flexibility you need for crash absorption while holding the camera securely during flight.
With a 4.2-star average from 3 reviews and an 81 percent five-star rate, the feedback is mostly positive. One reviewer did raise concerns about design licensing, which is worth noting if that matters to you, but the functional performance gets solid marks.
Who should buy this mount
If you fly a Runcam Thumb Pro and your frame uses a GoPro-style mounting system, this is the cheapest and cleanest way to make them work together. It is ideal for budget-conscious pilots who want quality without overspending.
It also suits pilots who want a visible, brightly colored camera mount for crash recovery purposes. The color options give you that visibility without paying extra.
What to watch out for
The design licensing concern raised by one reviewer is something to be aware of. The FPV community has strong opinions about designers getting credit for their work, so if you want to support original designers, you may want to research the design origin.
It also does not have prime shipping, so expect a slightly longer delivery window compared to fulfilled listings.
3. QWinOut 3D Printed TPU FPV Rack Tail Antenna Mount – Top Rated for iFlight Frames
QWinOut 3D Printed Printing TPU FPV Rack Tail Antenna Mount for iFlight iH3 XL5 V2 XL8 HL5/7 Frame DIY FPV Racing Drone Quadcopter
3D printed TPU
Tail antenna mount
Compatible with iFlight iH3 XL5 V2 XL8 HL5/7
Red color
Pros
- Perfect 5-star rating from all reviewers
- Snug and secure antenna hold
- Compatible with multiple iFlight frames
- Ideal for GPS wiring integration
Cons
- Ships within 4-5 days
- Limited to red color option
The QWinOut antenna mount has something that very few TPU products on Amazon can claim: a perfect 5.0-star rating from every single reviewer. While the review count is small at just 2, the unanimous praise tells me this mount does its job exactly right.
This is a tail antenna mount designed specifically for iFlight frames, including the iH3, XL5 V2, XL8, and HL5/7. That frame-specific compatibility is important because generic antenna mounts often fit loosely or require modification. When a TPU part is designed for your exact frame, the fit is snug and the vibration damping actually works.
Reviewers specifically praised the 3D print quality and the snug hold for VTX antennas. One user mentioned it works great for GPS wiring and extended GPS units, which adds versatility beyond just antenna mounting.
The red color gives it a distinctive look on your build, though it is the only option available. For pilots who run iFlight frames and want a reliable tail mount, this is about as safe a bet as you will find.
Who should buy this mount
This mount is built for iFlight frame owners who need a tail antenna or GPS mount that fits perfectly without modification. If you fly an iH3, XL5 V2, XL8, or HL5/7, this is essentially a purpose-made part for your drone.
It also suits pilots who prioritize print quality and snug fits over having multiple color options. The perfect review score suggests the manufacturer takes quality seriously.
What to watch out for
The mount ships within 4 to 5 days and does not have prime shipping, so plan ahead if you need it for a build deadline. The limited color selection means you are stuck with red regardless of your build color scheme.
Compatibility is restricted to specific iFlight frames. If you fly a different brand, this mount will likely not fit without significant modification.
4. UAZNJFZ M80 Pro BN220 GPS Module TPU Holder – Best Adjustable GPS Bracket
UAZNJFZ 3D Printed M80 Pro BN220 GPS Module TPU Holder Mounting Bracket Compatible with FPV Race Drone Frame Compatible with 18 to 32mm Distance(L22 W20 H7 Cyan)
TPU material
Fits M80 Pro and BN220 GPS
18-32mm adjustable range
4.5g weight
Cyan color
Pros
- Adjustable mounting range of 18 to 32mm
- Lightweight at just 4.5 grams
- Snug fit reduces GPS vibration interference
- Compatible with multiple racing frames
Cons
- Limited to specific GPS module compatibility
- Small review pool
The UAZNJFZ GPS holder caught my attention because of its adjustable mounting range. Most TPU GPS brackets are sized for one specific module, but this one supports a distance range of 18 to 32 millimeters, which means it can accommodate slightly different GPS module sizes and frame spacing.
At just 4.5 grams, this is one of the lightest mounts on the entire list. GPS modules are already small and light, so a heavy mount would defeat the purpose of using a micro GPS in the first place. The minimal weight means you get solid mounting without throwing off your drone center of gravity.
The single reviewer gave it a perfect 5-star rating, praising the snug fit that reduces vibrations. This matters for GPS performance because excessive vibration can cause GPS modules to lose lock or report inaccurate positions, which is a real problem for long-range and GPS-rescue setups.
The cyan color is a nice touch that makes the GPS module easy to identify on your build. It is constructed from resilient TPU that provides both strength and flexibility, which is exactly what you want for a part that will take impacts during rough landings.
Who should buy this bracket
This bracket is ideal for racing drone pilots who run an M80 Pro or BN220 GPS module and want a lightweight, adjustable mount. The 18 to 32mm range gives you flexibility if you swap between different GPS modules or frames.
It also suits long-range pilots who need reliable GPS performance, since the snug fit minimizes vibration interference that can degrade GPS accuracy.
What to watch out for
Compatibility is limited to specific GPS modules, primarily the M80 Pro and BN220. If you run a different GPS module, check the dimensions carefully before ordering.
With only one review, the long-term durability is still unproven by a larger user base. The initial feedback is positive, but you are buying based on limited data.
5. DTWLOPOP TPU Antenna Camera Mount for APEX HD DC – Most Versatile Option Set
TPU Antenna Camera Mount Arm Protective Seat for APEX HD DC
TPU material
Compatible with 5-7 inch frames
20+ variant options
50g weight
APEX HD DC compatible
Pros
- Over 20 variant options for different needs
- Compatible with 5-7 inch RC frames
- TPU material for component protection
- Easy to install and assemble
Cons
- New product with no reviews yet
- No prime shipping
The DTWLOPOP listing stands out because of the sheer number of variants available. With over 20 options including APEX SMA mounts, GoPro bases, dual SMA mounts, front protectors, arm protectors, and GPS antenna mounts in both black and cyan, this is essentially a full TPU parts catalog in a single listing.
I found this approach refreshing because it means you can outfit an entire APEX HD or APEX frame with matching TPU parts from one source. Instead of mixing mounts from different manufacturers with slightly different TPU formulations and colors, you get a consistent set.
The parts are designed for 5 to 7 inch RC frames, which covers the most popular freestyle and long-range sizes. The TPU material provides the component protection you expect, and the listing confirms easy installation and assembly.
Being a new product with no reviews yet means you are taking a chance on quality. However, the breadth of options and the specific frame targeting suggest the manufacturer understands the APEX HD ecosystem well.
Who should buy these mounts
These mounts are perfect for APEX HD or APEX frame owners who want to buy all their TPU parts from one listing. If you are building or rebuilding an APEX-based drone, you can get your camera mount, antenna mount, arm protectors, and GPS mount in matching colors.
The 5 to 7 inch frame compatibility also makes this suitable for long-range and freestyle pilots who fly larger quadcopters where TPU protection matters most.
What to watch out for
With zero reviews, there is no community feedback to validate the quality. You are buying based on the listing description alone, which carries some risk.
At 50 grams for the set, some individual pieces may be heavier than minimalist alternatives. Check the weight of each specific variant if grams matter on your build.
6. RBoand TPU Camera Mount with Adjustable Tilt – Best for GoPro Action Cameras
RBoand TPU Camera Mount with 0 to 40 Degree Adjustable Tilt for Hero 8, 7, 6, 5 – Compatible with FPV Racing Drones(for Gopro 8)
Adjustable 0-40 degree tilt
TPU shock absorbing material
Hero 5-8 compatible
FPV racing drone design
Corrosion resistant
Pros
- Adjustable tilt angle from 0 to 40 degrees
- Compatible with Hero 5 through Hero 8
- TPU material for shock absorption
- Designed specifically for FPV racing
Cons
- New product with no reviews
- No prime shipping
- 2-3 day shipping delay
The RBoand mount is built for pilots who fly GoPro action cameras on their FPV drones and need adjustable camera angles. The 0 to 40 degree tilt range covers the most common FPV camera angles, from level cruising for cinewhoop-style flying to aggressive forward tilt for racing and freestyle.
I appreciate that this mount is compatible with the full range of older GoPro Hero cameras (5, 6, 7, and 8). Many pilots still fly these cameras because they are affordable and produce great HD footage, so having a dedicated TPU mount for them is valuable.
The TPU material provides the shock absorption that action cameras need on FPV drones. Without proper vibration dampening, your footage will suffer from jelly effect, where horizontal lines wobble across the frame. A good TPU mount significantly reduces this problem.
The mount is designed specifically for FPV racing drones, which means the form factor and weight are optimized for the demands of high-speed flight. The corrosion-resistant special feature suggests the TPU formulation will hold up over time even with exposure to moisture and humidity.
Who should buy this mount
This mount is ideal for FPV pilots who fly a GoPro Hero 5, 6, 7, or 8 and want an adjustable mount that lets them change camera angles without swapping parts. The tilt range covers everything from casual cruising to aggressive freestyle.
It also suits pilots who prioritize footage quality, since the TPU shock absorption directly reduces jelly effect in recorded video.
What to watch out for
This is a new product with no reviews, so quality and fit are unproven by the community. The 2 to 3 day shipping window and lack of prime eligibility mean you will wait longer than with fulfilled listings.
It is also only compatible with GoPro Hero cameras, so if you fly a naked GoPro, Insta360, or other action camera systems, you need a different mount.
7. FEICHAO Thumb HD Action Camera Frame – Best Anti-Jelly RunCam Mount
FEICHAO Thumb HD Action Camera Frame All-Inclusive TPU Printed M3 M4 M5 Hole Compatible with RUNCAM Thump Camera (M5 Hole Pure Black)
TPU all-inclusive print
M3, M4, M5 hole options
RunCam Thumb compatible
Multiple color options
Reduces jelly effect
Pros
- TPU all-inclusive printing reduces jelly effect
- Multiple mounting hole options M3 M4 M5
- Compatible with RunCam Thumb HD camera
- Bright color options for visibility
- Small and lightweight
Cons
- Not water resistant
- Ships in 4-5 days with no prime
The FEICHAO Thumb frame is designed specifically for the RunCam Thumb HD action camera, which has become a popular lightweight HD recording option for FPV pilots. The all-inclusive TPU printing wraps around the camera to provide maximum vibration dampening.
What makes this mount special is the explicit focus on reducing jelly effect. The listing calls this out directly, which tells me the manufacturer understands the specific pain point that FPV pilots face with HD footage. The wraparound TPU design isolates the camera from frame vibrations more effectively than a simple bracket.
The M3, M4, and M5 hole options give you flexibility in how you mount the camera to your frame. Different frames use different bolt sizes, so having all three options means this mount works across a wider range of builds without requiring adapters.
The color selection is impressive for the M3 version, with blue, yellow, orange, red, grey, and black available. The M4 and M5 versions come in black only. Bright colors help with crash recovery, which is a practical advantage that experienced pilots appreciate.
Who should buy this frame
This frame is perfect for RunCam Thumb owners who want maximum vibration isolation for clean HD footage. If jelly effect has been ruining your recordings, the all-inclusive TPU wrap design directly addresses that problem.
It also suits pilots who need flexible mounting options across different frames, thanks to the M3, M4, and M5 hole compatibility.
What to watch out for
The mount is not water resistant, which is expected for TPU parts but worth noting if you fly in wet conditions. The 4 to 5 day shipping window with no prime means you need to plan ahead.
Being a new product with no reviews, you are relying entirely on the listing description. The design concept is sound, but community validation is still pending.
8. SwiPle 3D Printed TPU Bracket for Naked GP9-12 – Best for Naked GoPro Builds
3D Printed TPU Bracket Mount Support M5/M3 Hole for Naked GP9/GP10/GP11/GP12 FPV Drone Frame DIY Parts(Red M3 GP9-10-11)
3D printed TPU bracket
M3 and M5 hole options
Compatible with naked GP9-12
M3 weighs 5.9g
M5 weighs 6.3g
Pros
- Compatible with naked GP9 through GP12 cameras
- Extremely lightweight at under 6.3g
- Available in M3 and M5 hole types
- TPU material provides absorption and support
Cons
- Ships in 6-7 days
- No prime shipping
- New product with no reviews
The SwiPle bracket targets the naked GoPro crowd, specifically pilots who strip down GP9, GP10, GP11, or GP12 cameras to save weight. Naked GoPro builds are popular in freestyle because they deliver GoPro quality at a fraction of the weight, but they need a dedicated mounting bracket since the naked board does not have the standard GoPro mounting interface.
At 5.9 grams for the M3 version and 6.3 grams for the M5 version, this bracket is exceptionally light. When you are already stripping weight from your camera, adding a heavy mount would be counterproductive. This bracket adds almost nothing to your build weight.
The M3 and M5 hole options cover the two most common bolt sizes used in FPV frames. The red M3 GP9-10-11 variant is specifically labeled for those camera generations, which helps you order the right part the first time.
The quick mounting design lets you attach and remove the bare camera without fiddling with complex hardware. For pilots who swap cameras between builds or remove them for charging, this convenience factor matters.
Who should buy this bracket
This bracket is built for freestyle pilots running naked GoPro builds who need a lightweight, reliable mounting solution. If you fly a stripped GP9, GP10, GP11, or GP12, this bracket is purpose-made for your setup.
It also suits weight-obsessed builders who count every gram, since the sub-6.3g weight is among the lightest on this list.
What to watch out for
The 6 to 7 day shipping window is the longest on this list, so plan well ahead. No prime shipping is available, and as a new product there are no reviews to validate fit and quality.
Compatibility is limited to naked GoPro cameras only. If you fly a full GoPro in its housing or a different camera system entirely, this bracket will not work.
9. Shuaichi 120 GPS Module Mount for Pavo20 Pro – Best for BetaFPV CineWhoop
120 GPS Module Mount Holder TPU GPS Fixed Bracket for Pavo20 Pro FPV Drone
TPU95A material
Pavo20 Pro compatible
Fits 12x16x7mm GPS modules
Cable tie included
120 GPS module support
Pros
- Specifically compatible with Pavo20 Pro FPV drone
- Universal fit for 12x16x7mm GPS modules
- TPU95A material absorbs impact forces
- Suitable for high-speed freestyle and crash collisions
Cons
- 3D printed surface may have minor flaws
- No prime shipping available
The Shuaichi GPS mount is designed specifically for the BetaFPV Pavo20 Pro, which is one of the most popular cinewhoop frames on the market. Cinewhoop pilots often want GPS for navigation and return-to-home functionality, but finding a mount that fits a tiny 2-inch frame is challenging.
This mount uses TPU95A material, which is the community-recommended hardness for general FPV use. The 95A designation means it is firm enough to hold the GPS module securely during flight but flexible enough to absorb impact forces during the inevitable bump-and-go landings that cinewhoop pilots perform.
The universal fit for 12x16x7mm GPS modules covers the most common micro GPS units used in cinewhoop builds. The included cable tie provides additional securing options, which is a thoughtful inclusion that saves you from needing a separate hardware store run.
The mount is specifically rated for high-speed freestyle flights and crash collisions. This tells me the manufacturer tested it under real FPV conditions rather than just designing it on a computer and hoping for the best.
Who should buy this mount
This mount is perfect for Pavo20 Pro owners who want to add GPS capability to their cinewhoop. The frame-specific design means it will fit without modification, which is critical on a compact 2-inch build where space is at a premium.
It also suits pilots running standard 12x16x7mm GPS modules who want a TPU95A mount that can handle crash impacts without ripping apart.
What to watch out for
As a 3D printed product, the surface may have minor flaws or layer lines. This is normal for 3D printed TPU parts but worth setting expectations if you are used to injection-molded finishes.
No prime shipping is available, and as a new product with no reviews, you are buying based on the specification sheet alone. The TPU95A material choice is a good sign, as it aligns with community recommendations.
10. FTYUERT BN-220 GPS Module TPU Mount – Best for GEPRC Mark5 Frames
FTYUERT Drone toy accessories 3D Printed BN-220 GPS module Mount TPU Holder T-shaped Antenna Fixed Bracket Seat for FPV Drone for Mark5 Frame analog digital parts(Black GPS Mount)
TPU T-shaped design
BN-220 GPS compatible
Mark5 frame fit
Analog and digital support
1.76 ounces
High-quality finish
Pros
- High-quality material with fewer burrs
- Good texture and wear resistance
- Lightweight and portable
- Compatible with Mark5 frame for analog and digital
Cons
- New product with no reviews
- No prime shipping
- 2-3 day shipping window
The FTYUERT mount is a T-shaped GPS bracket designed specifically for the GEPRC Mark5 frame, which is one of the most popular freestyle frames in the FPV community. The Mark5 has specific geometry that requires purpose-designed TPU parts for proper fitment.
The T-shaped design provides a stable mounting platform for the BN-220 GPS module, which is one of the most widely used GPS units in FPV. The shape distributes forces evenly across the mount, reducing the chance of the GPS module detaching during hard crashes.
The listing emphasizes high-quality material with fewer burrs, which is a real concern with budget 3D printed parts. Burrs and rough edges can interfere with fitment and look unfinished, so the attention to surface quality is a positive sign.
Compatibility with both analog and digital setups means this mount works regardless of your video transmission system. Whether you run an analog VTX or a digital system like DJI, Walksnail, or HDZero, the GPS mount functions the same way.
Who should buy this mount
This mount is ideal for GEPRC Mark5 owners who want to add a BN-220 GPS module to their freestyle build. The frame-specific design ensures proper fitment without the trial and error of generic mounts.
It also suits pilots who want a clean, burr-free TPU part that looks professional on their build. The attention to surface finish sets it apart from cheaper alternatives.
What to watch out for
As a new product with no reviews, the fitment and durability are unproven by the community. The 2 to 3 day shipping window and lack of prime eligibility mean you need to plan ahead.
Compatibility is limited to the Mark5 frame and BN-220 GPS module. If you fly a different frame or use a different GPS unit, check dimensions carefully.
11. HYFBMTD TPU Naked GoPro Camera Seat for Cloud 149 – Best for 3-Inch Builds
HYFBMTD Drone Parts for 3D Printed for TPU Naked for GoPro Camera Fixed Seat Bracket Cloud 149 Frame Mount Holder for 3Inch FPV Drone Quadcopter(Yellow)
3D printed TPU
Cloud 149 frame compatible
3 inch FPV drone
Naked GoPro seat
Yellow or black
1.76 ounces
Pros
- Specifically designed for Cloud 149 3-inch frame
- Good texture and long service life
- Durable and practical design
- Available in yellow and black
Cons
- New product with no reviews
- 3-4 day shipping window
- No prime shipping
The HYFBMTD mount targets the Cloud 149 frame, which is a popular 3-inch FPV frame used in both freestyle and cinewhoop builds. Three-inch drones sit between full-size freestyle quads and tiny whoops, making them versatile but requiring specific mounting solutions.
This is a naked GoPro camera fixed seat, meaning it is designed to hold a stripped-down GoPro camera board. Naked GoPro setups on 3-inch frames are common because they provide HD recording without the weight penalty of a full action camera.
The mount is available in yellow and black, giving you a choice between a high-visibility color for crash recovery and a stealthy black for a clean build aesthetic. At 1.76 ounces, it adds minimal weight to your 3-inch build.
The listing describes good texture and long service life, which speaks to the durability expectations. TPU mounts on smaller frames take proportionally harder impacts because the lighter drone can accelerate and change direction more aggressively, so durability matters.
Who should buy this seat
This seat is perfect for Cloud 149 frame owners running a naked GoPro on a 3-inch build. The frame-specific design means it fits without modification, which saves build time and frustration.
It also suits pilots who want a visible yellow mount for crash recovery on a small drone that can be hard to spot in vegetation.
What to watch out for
The 3 to 4 day shipping window and lack of prime shipping mean you need to order ahead. As a new product with no reviews, fitment and quality are based solely on the listing description.
Compatibility is limited to the Cloud 149 frame. If you fly a different 3-inch frame, this seat may not fit without modification.
12. Generic TPU Camera Lens Cover for Air Unit – Best Lens Protection
3D Printed TPU Material Fixed Mount Camera Lens Cover Air Unit Camera Lens Protector for RC DIY FPV Racing Drone
TPU fixed mount
Air Unit camera compatible
Lens protector cover
Pack of 2
PC plastic material
18+ recommended
Pros
- Protects Air Unit camera lens from damage
- Comes in a pack of 2 for spares
- Simple slide-on installation
- Compatible with DJI Air Unit cameras
Cons
- New product with no reviews
- No prime shipping
- Limited product information
The Generic TPU lens cover takes a different approach from the other mounts on this list. Instead of mounting a camera to your frame, it protects the lens of your existing Air Unit camera from scratches, dust, and crash damage. Think of it as a helmet for your FPV camera lens.
The pack of 2 means you get a spare, which is practical because lens covers take the brunt of frontal impacts. When you nose-dive into the ground, the lens cover hits first, and having a replacement ready means you can keep flying without waiting for a new one to arrive.
The PC (polycarbonate) plastic material is rigid enough to deflect impacts away from the actual lens while being lightweight enough to not affect your drone handling. This is a different material from the flexible TPU used in camera mounts, which makes sense for a lens protector that needs to be hard rather than soft.
Installation appears to be a simple slide-on design that fits over the Air Unit camera housing. No tools or modifications are needed, which is what you want for a quick-install protective part.
Who should buy this cover
This cover is ideal for pilots flying DJI Air Unit cameras who want to protect their FPV camera lens from crash damage. If you have ever scratched or cracked an Air Unit lens, you know how expensive the replacement is compared to a simple cover.
The pack of 2 also suits pilots who fly frequently and want a spare on hand for immediate replacement after a crash.
What to watch out for
Product information is limited, with minimal technical details beyond the basic specifications. As a new product with no reviews, you are relying entirely on the listing description.
Compatibility appears to be limited to Air Unit cameras specifically. If you fly a different FPV camera system, check dimensions carefully before ordering.
Buying Guide: How to Choose TPU Mounts for FPV Drones?
Choosing the right TPU mount for your FPV drone comes down to four main factors: material hardness, mount type, frame compatibility, and your flying style. Get these right and your gear will survive crashes that would destroy rigid mounts. Get them wrong and you will be replacing parts after every session.
Understanding TPU Hardness: 85A vs 95A vs 98A
Shore hardness is the single most important spec when choosing TPU mounts for FPV drones. The FPV community on r/fpv has reached a strong consensus on 95A as the sweet spot for general use, and my research confirms this across multiple forum discussions.
Shore 85A is the softest option commonly used. It provides excellent vibration dampening and is ideal for camera isolation mounts where you need maximum jelly effect reduction. However, it can be too soft for structural parts like arm guards that need to hold their shape under load. Some forum users report 85A mounts ripping under heavy crash impacts.
Shore 95A is the most recommended hardness for general FPV use. It is firm enough to hold components securely and survive repeated crashes, yet flexible enough to dampen vibrations effectively. This is the hardness used in the Shuaichi Pavo20 Pro mount and recommended by the majority of experienced pilots I found in forum discussions.
Shore 98A is the stiffest option and is used for parts that need to maintain structural rigidity, such as arm protectors and bumper guards. It absorbs less vibration but holds its shape better under impact. If you fly aggressive freestyle and regularly slam your arms into gates and concrete, 98A is worth considering for those specific parts.
Choosing the Right Mount Type
TPU mounts for FPV drones fall into several categories, and most pilots need a combination of them. Camera mounts hold your FPV camera or action camera and provide vibration isolation for clean video. Antenna mounts secure your VTX antenna or GPS antenna to the frame, preventing them from snapping off during crashes. GPS module brackets hold your GPS unit securely while allowing it to get a clean sky view. Arm protectors wrap around your frame arms to absorb impact during crashes and gate collisions. Motor soft mounts sit between your motors and frame arms to reduce vibration transmission.
Think about which of these your build actually needs. A freestyle pilot running HD recording needs a good camera mount above all else. A long-range pilot needs a reliable GPS bracket. A racer needs arm protectors to survive gate hits. Match your mount purchases to your flying style.
Frame Compatibility: The Make-or-Break Factor
The most common mistake I see in forum posts is pilots buying TPU mounts that do not fit their frame. TPU mounts are often designed for specific frames because the mounting hole patterns, standoff distances, and component layouts vary between manufacturers. A mount designed for a GEPRC Mark5 will not fit a Lumenier frame without modification, and vice versa.
Always check the frame compatibility listed in the product description before buying. If you fly a popular frame like the Mark5, Pavo20 Pro, iFlight iH3, or Cloud 149, you will find purpose-designed mounts like the ones in this guide. If you fly a less common frame, you may need to look at 3D printing your own or finding a specialty retailer like Pyrodrone or GetFPV that stocks frame-specific parts.
Pre-Made vs 3D Printed: Which Makes Sense?
One of the biggest content gaps I found was the lack of clear guidance on buying pre-made mounts versus printing your own. Here is the practical breakdown based on my research and forum insights.
Pre-made mounts from Amazon or specialty retailers are the best choice for pilots who do not own a 3D printer or who need a part quickly. They are inexpensive (typically between $7 and $34), arrive ready to install, and come from designers who have already tested the fit. The downside is that you are limited to the designs and frame compatibility that manufacturers choose to produce.
3D printing your own mounts gives you unlimited design options, especially from repositories like Thingiverse where the FPV community shares free designs. The FPV community recommends Sainsmart 95A TPU filament as the best quality option, with eSun 95A praised for being easy to print. The main pain point is that printing TPU requires a direct drive extruder for best results, and Bowden extruder users struggle with inconsistent results. Print speeds of 20 to 30mm/s produce the best quality according to experienced users.
Price-to-Value Considerations
The TPU mounts in this guide range from around $7 to $34. The price differences reflect complexity, completeness, and brand positioning rather than quality alone. A $7 single-purpose mount like the QY3D Thumb Pro adapter can deliver just as much value as a $34 complete kit if it solves your specific problem.
The best value typically comes from complete kits like the VBESTLIFE package, which covers multiple mounting needs in one purchase. For pilots who only need one specific part, single mounts from established designs offer the lowest cost of entry.
FAQs
How soft should TPU be for drone parts?
For most FPV drone parts, Shore 95A TPU is the ideal hardness because it balances vibration dampening with structural integrity. Shore 85A is better for camera isolation mounts where maximum vibration absorption matters, while Shore 98A works for arm protectors and structural parts that need rigidity. The FPV community on r/fpv consistently recommends 95A as the best all-around hardness.
What is the best TPU brand for FPV drone mounts?
The FPV community widely regards SainSmart 95A TPU as the best quality filament for printing drone parts. eSun 95A is also praised for being easy to print and stiff when needed. For pre-made mounts, brands like GEPRC, Lumenier, Flywoo, and BetaFPV produce frame-specific TPU parts that are trusted by pilots. Sunlu TPU has inconsistent quality according to some users.
How do I print TPU camera mounts for FPV drones?
Use a direct drive extruder for best results, set nozzle temperature between 220 and 240 degrees Celsius, bed temperature to 40-60 degrees, and print speed to 20-30mm/s. Disable retraction or set it to a minimal value to prevent filament jams. Use SainSmart or eSun 95A TPU filament, and reduce cooling fan speed to improve layer adhesion.
What hardness TPU should I use for GoPro mounts?
Shore 95A TPU is the best hardness for GoPro mounts on FPV drones because it absorbs enough vibration to reduce jelly effect while holding the camera securely during aggressive flight. Shore 85A can work for camera isolation but may flex too much under the weight of a full GoPro, while 98A transmits too much vibration for clean footage.
Conclusion
Finding the best TPU mounts for FPV drones does not have to be complicated once you know your frame, your camera, and your flying style. The VBESTLIFE complete kit covers all the basics for a new build, the QY3D adapter solves the Thumb Pro to GoPro problem affordably, and the QWinOut antenna mount delivers frame-specific reliability for iFlight pilots.
Whether you are building a freestyle 5-inch, a cinewhoop, or a long-range cruiser, the mounts in this guide will keep your cameras, antennas, and GPS modules secure through the crashes that are part of flying FPV. Match the mount to your frame, choose 95A hardness for general use, and your gear will thank you for it.