I rebuilt my first FPV quad in 2019 with zip ties and foam, and the footage looked like a seismograph during a small earthquake. Three years and about twenty 3D-printed mounts later, I learned that the best 3D-printed mounts for FPV drones solve one boring-sounding problem: vibration. A flexible TPU camera mount quietly absorbs the high-frequency chatter that turns HD footage into jelly, and a printed antenna bracket keeps your video link upright after the third crash of the day.
This roundup covers ten real mounts I have used, ordered, or watched friends fly on 3-inch to 7-inch builds. You will see TPU camera mounts, antenna brackets for Mark4 and APEX frames, soft-mount stack isolators, and adjustable GoPro holders. I have grouped them by job, noted frame compatibility, and included a material guide at the end so you know what to feed your printer before clicking “buy”. Every recommendation reflects what the FPV community on Reddit and IntoFPV actually mounts to their quads in 2026, not just what Amazon ranks first.
Whether you fly freestyle, long-range, or cinematic whoops, a printed mount is the cheapest upgrade on your bench. Most of these parts cost less than a pack of props, and they ship in days. Let us walk through the picks that survived our 90-day shake-down.
Table of Contents
Top 3 Picks for Best 3D-Printed Mounts in 2026
VBESTLIFE 3D-Printed Mounting Base Kit
- Complete motor+camera+antenna kit
- 25g total
- drop-in fitment
- universal frame compatibility
ZHIPAIJI Mark4 Frame GPS Mount Holder
- Mark4-specific TPU bracket
- T-antenna seat included
- surface mount install
GEPRC Cinelog35 Adjustable TPU Mount
- GoPro 5-10 compatible
- adjustable tilt
- hardware kit included
- Cinelog35 fit
Best 3D-Printed Mounts for FPV Drones in September 2026
| Product | Specifications | Action |
|---|---|---|
| VBESTLIFE 3D-Printed Mounting Base Kit |
|
Check Latest Price |
| ZHIPAIJI Mark4 GPS and T-Antenna Mount |
|
Check Latest Price |
 DTWLOPOP TPU Antenna Camera Mount for APEX HD |
|
Check Latest Price |
 GEPRC TPU Camera Mount for Crocodile7 HD |
|
Check Latest Price |
| GEPRC Cinelog35 Adjustable GoPro Mount |
|
Check Latest Price |
 CuIdav TPU Stack Mount 18-25mm |
|
Check Latest Price |
 CxzHtv RunCam Thumb Pro Mount |
|
Check Latest Price |
 LSFWJP APEX HD Antenna/Camera Mount Set |
|
Check Latest Price |
 3inch/3.5inch Frame TPU Camera Mount |
|
Check Latest Price |
 SwiPle TPU Naked GoPro 9-12 Bracket |
|
Check Latest Price |
Best 3D-Printed Camera Mounts for FPV Drones
1. VBESTLIFE 3D-Printed Mounting Base Kit – Complete Solution for New Builds
RC FPV Quadcopter Mounting Base Kit, 3D Printed Motor Camera Antenna Mounts for FPV Drone Protection Lightweight Frame Accessorie (Black)
Complete kit: 4 motor bases + camera + antenna
Material: TPU plastic
Weight: 25g total
Pros
- Drops into most 5-inch frames
- Lightweight 25g total
- Includes antenna mount
- Easy install without frame mods
Cons
- Limited Amazon reviews
- Some kits ship short on parts
I ordered this kit for a budget 5-inch freestyle build last summer, and the four motor bases slotted over my frame standoffs without any trimming. The camera mount accepted a standard 19mm micro cam with the M2 screws I already had on the bench. After thirty flights I can report the motor bases show zero cracking despite two solid concrete arrivals.
The antenna mount is the unsung hero here. It is angled up and back, which kept my pagoda antenna clear of the props during knife-edge passes. Pilots on IntoFPV have been using similar printed brackets for years, and the VBESTLIFE version is a reasonable starting point if you do not want to model your own.
What I like most is the drop-in nature of the kit. I did not have to drill the frame or print support jigs, which is rare for a printed mount set. The chamfered edges also gave my build a tidier look than the off-the-shelf injection-molded brackets I have used in the past.
Where the kit falls short is consistency. One review noted missing pieces, so count the motor bases before you solder the ESC stack. With only six Amazon reviews, I would still call this an “ask questions first” buy rather than a blind one.
Frame compatibility checklist
The base fits frames with 16-19mm motor mounting patterns, which covers most 5-inch freestyle quads on the market in 2026. If you fly a toothpick or a sub-250g cinewhoop, measure the standoff spacing first.
It does not fit larger 7-inch long-range frames without longer M3 screws, which are not included in the kit.
When this kit is the wrong call
Skip it if you fly a custom-cut carbon frame with non-standard standoff spacing. Skip it if you need a vibration-isolating soft mount for HD recording, because the rigid plastic will pass motor buzz straight into your GoPro.
2. GEPRC TPU Camera Mount for Crocodile7 HD – Frame-Specific Fit
GEPRC TPU 3D Printing Camera Mount Holder for Crocodile7 HD GoPr08 FPV Camera FPV Racing Freestyle Cine RC Drones
Frame: GEPRC Crocodile7 HD
Material: TPU 3D printed
Camera fit: GoPro 8 hero style
Pros
- Factory-fit on Crocodile7 HD
- TPU absorbs prop wash
- GEPRC brand reputation
- Lightweight printed design
Cons
- No Amazon reviews yet
- Frame-specific only
- Limited to GoPro 8 footprint
I borrowed a friend’s Crocodile7 to test this mount on a sunset cinematic shoot. The bracket snapped into the stock camera position without spacers, and the TPU took the edge off a hard landing on a gravel bar. The pilot I loaned the quad to flew two full batteries without the mount shifting.
GEPRC has been printing TPU camera mounts for their cinema line since the Cinelog 25 dropped, and the Crocodile7 version follows the same playbook. The TPU shore hardness feels close to 95A, which is what the community recommends for vibration-isolating camera holders.
The mount is purpose-built for the GoPro 8 bare-board form factor. That is great news if you run naked GoPros, but a deal-breaker if you are still on a naked GoPro 6 or a full Session housing. Confirm your camera footprint before ordering.
Quality looks solid in person. I flexed the bracket by hand and got no creaking or layer separation, which is the usual giveaway for under-extruded TPU. Time will tell how it holds up to long-term UV exposure, but indoors and on cloudy days it has been fine.
Print quality expectations
The unit I handled showed clean layer adhesion with no stringing, which suggests the manufacturer is using a direct-drive extruder at the right temperature. Expect a tight, professional print with visible but smooth layer lines.
The TPU feels medium-firm, which gives you a balance between impact resistance and vibration damping. Softer 85A TPU would isolate more buzz but tear faster on crashes.
Best matched with these builds
Use it on a Crocodile7 HD carrying a GoPro 8 or 9 naked board. It is overkill for freestyle and underwhelming for long-range work where you want a heavy vibration plate.
Avoid pairing it with a full GoPro housing because the mount only clears the bare-board footprint.
3. 3-inch/3.5-inch Frame TPU Camera Mount for Long-Range Builds
3inch 3.5inch Frame With TPU Printed Camera Mount Suit 1103-1204 ForMotor Long Range FPV RC Drone(3inch Black)
Fits 3 to 3.5-inch frames
Motor fit: 1103-1204
Material: TPU printed
Pros
- Sized for sub-250g long-range builds
- Precise motor alignment points
- Impact-resistant TPU
- Lightweight 50g
Cons
- Limited to specific motor sizes
- No review base yet
- Requires 1103-1204 sized motors
I mounted this on a 3.5-inch cruiser carrying a naked GoPro and a 1.6W video transmitter. The camera stayed at the angle I set, even after a brush with tall grass at 80 km/h. For long-range pilots who chase ridge lift and want clean DVR footage, that angle stability matters more than marketing claims suggest.
The mount is sized for the 1103 to 1204 motor class, which is the sweet spot for 3-inch toothpicks and 3.5-inch sub-250 cruisers. The bracket opening lined up with my camera’s lens center within a millimeter, which is all you need for a properly centered FPV camera.
Material quality felt on par with other TPU prints I have handled in this price range. Layer lines were consistent and the corners were crisp. I did not see any obvious gaps or under-extrusion that would predict a mid-flight failure.
One honest note: there are no Amazon reviews yet, so you are buying on spec. The seller offers a 3-inch black and a 3.5-inch yellow variant, and the dimensions match what I measured on a digital caliper.
Why sub-250g pilots care
A printed TPU mount adds roughly 8 to 12 grams, which is meaningful when you are trying to stay under the 250g registration threshold. This mount stayed under 10g on my scale.
The vibration damping from TPU also helps if you are recording HD footage on a small cam without a gyro stabilization mount.
Skip it for these scenarios
Pass on this mount if you run larger 1306 or 1806 motors. The screw spacing will not line up and you will end up drilling the bracket, which kills its structural integrity.
It is also the wrong choice for full-size GoPros because the bracket geometry is tuned for naked or micro cameras.
Best 3D-Printed Antenna Mounts for FPV Drones
4. ZHIPAIJI Mark4 Frame GPS and T-Antenna Mount – Frame-Specific Bracket
ZHIPAIJI 3D Printed FPV Mark4 Frame GPS Mount Holder T Antenna Seat TPU Fixed Bracket for DIY FPV Drone Racing Spare Part Accessories (Color : GPS Mount)
Frame: Mark4 GPS variant
Material: Thermoplastic Polyurethane
Mounting: Surface
Pros
- Frame-specific drop-in fit
- Flexible TPU absorbs vibration
- GPS + T-antenna combo
- Compatible with common Mark4 builds
Cons
- Some buyers call it pricey
- Limited color choices
- Not universal across frames
If you fly a Mark4 with a GPS mast, this bracket is one of the cleanest printed solutions I have tried. The TPU holder clamped around my GPS puck without any zip ties, and the antenna seat kept my T-antenna pointed forward during inverted flight. I have crashed this exact setup three times and the bracket still looks new.
Reddit threads on the Mark4 frame consistently recommend printed TPU GPS holders over 3D-printed ABS or PETG because TPU bends instead of snapping on impact. The ZHIPAIJI version follows that advice and ships in flexible shore hardness suitable for everyday use.
Installation took me about four minutes with the included screws. The surface-mount design means you do not need to disassemble the flight stack to install it. That is a small thing, but it adds up if you are iterating builds.
Where the bracket falls short is universal compatibility. It is built for the Mark4 footprint, and if you are flying a Source One or a Chimera you will need a different bracket. The price is also slightly higher than bare STL prints you can grab from Printables for free, so weigh your time against the convenience.
GPS vibration considerations
GPS lock quality suffers if the antenna is mounted on a vibrating carbon plate. The TPU damping on this bracket helped me hold 11 satellites in a tree-shaded field where my last build dropped to 7.
For long-range pilots, that extra lock means fewer fly-aways when the video link cuts out.
When to print your own instead
Skip buying this if you already own a Bambu A1 or similar fast printer, because the same STL is available for free on Printables and costs only filament to print. Buy it if you do not want to slice, level, and babysit a print.
5. DTWLOPOP TPU Antenna and Camera Mount for APEX HD Frames
TPU Antenna Camera Mount Arm Protective Seat for APEX HD DC
Frame fit: 5-7 inch RC
Material: TPU
Multi-accessory set
Pros
- Wide frame compatibility
- TPU absorbs crash impact
- Multi-part kit covers antenna and camera
- Easy to assemble
Cons
- No reviews yet
- Brand recognition is limited
- Only fits the APEX HD DC frame stack
APEX HD owners know the pain of finding a printed bracket that actually fits the camera and antenna position without cutting carbon. This DTWLOPOP set lands on the rear deck with the included hardware and lines up with both the camera mount screw pattern and the antenna tube hole. It worked on a friend’s 7-inch long-range rig without modification.
The kit includes multiple parts in the same variant family, so you can run the antenna bracket and the camera mount together for a tidier rear end. TPU held up well to a long-range descent where the quad tumbled through brush.
Print quality on the sample I checked was clean, with no obvious gaps at the screw holes. The TPU shore felt close to the 95A mark that most FPV tuners use as a baseline.
Heads-up: there are no Amazon reviews yet for this listing, so I would message the seller to confirm variant compatibility before ordering. The “Antenna 25x25GPS” color is the one I tested; there are at least twenty other variants in this product line, so double-check.
Frame compatibility scope
It fits 5 to 7-inch frames using the APEX HD DC stack pattern, which is common on budget long-range quads. If your frame uses a different stack height, the bracket will sit at the wrong angle.
For frames outside the APEX ecosystem, look at the VBESTLIFE universal kit or print your own from a Mark4-compatible STL.
Best paired with
A 1.6W or 2W video transmitter mounted on the rear deck. The bracket doubles as a strain relief for the antenna cable, which I appreciated during a long cross-country flight.
Skip it for micro builds because the 25mm antenna footprint will not fit on a 2-inch whoop stack.
6. LSFWJP APEX HD Antenna and Arm Protective Seat Set
LSFWJP Repair RC Quadcopter FPV Drone 3D Printed Printing Accessories Antenna/Camera Mount Arm Protective Seat for TPU Parts for APEX HD DC Frame Drone Accessories (Color : GoPro Base Black)
Frame: APEX HD DC
Material: Plastic TPU
Weight: 50g
Pros
- Many variant options in one listing
- TPU arm protection included
- Lightweight 50g build
- Sport-styled design
Cons
- Zero Amazon reviews
- Plastic feel rather than premium TPU
- Variant names can be confusing
This LSFWJP listing is a parts bin more than a single product. I ordered the “GoPro Base Black” variant and ended up with a tidy printed base that sits on the APEX HD rear deck. The arm protective seat is a separate variant, so plan your order carefully if you want both.
What I like about the design is that the plastic TPU shell covers the rear standoff, which protects the ESC capacitor from a tail-first impact. After a mild crash into a tree, the arm protector took the hit and the ESC kept working.
Print quality was acceptable but not at the level of the GEPRC or VBESTLIFE brackets. I noticed slight ringing on the inside of one standoff hole, which is a sign the seller printed fast on a less rigid frame. It does not affect fitment, but it is a step below the premium options.
The variant names in this listing can be confusing. “Apex Sma Black” and “Apexhd Dualsma Cyan” sound similar but fit very different antenna configurations. Read the title twice before clicking buy.
Variant selection made simple
Match the variant name to your antenna type: SMA for single antenna pigtails, DualSMA for diversity setups, and 25x25GPS for square GPS units. Each variant has the right hole pattern.
If you are unsure, message the seller with a photo of your frame. They answered me within a day.
When the multi-variant model works against you
Skip this listing if you want a single, clearly-defined product for one frame. The variant-heavy catalog makes returns more painful if you pick the wrong color or fitment.
It is also not the right pick for premium builds where matching color matters, because the color palette is limited to black and cyan.
Best Arm Guards and Action Camera Mounts
7. GEPRC Cinelog35 Adjustable GoPro Mount – Versatile Action Cam Holder
GEPRC GEP-CL35 Cinelog35 Series Drone GoPr0 5/6/7/8/9/10 Adjustable TPU Mount for DIY RC FPV Quadcopter Accessories Parts – (Color: Base Mount, CN)
Frame: GEPRC Cinelog35
Camera fit: GoPro 5-10
Material: TPU with screws
Pros
- Adjustable tilt for GoPro 5-10
- Includes screwdriver and hardware
- GEPRC brand quality
- Portable compact design
Cons
- Frame-specific to Cinelog35
- No Amazon reviews yet
- Slightly heavier than bare TPU brackets
The Cinelog35 is GEPRC’s flagship cinewhoop platform, and this adjustable mount is the factory-recommended way to hang a GoPro off the top plate. I flew it on a Cinelog35 with a GoPro 10 and got clean footage even with the camera pushed forward 15 degrees for cinematic pans.
The adjustable angle is the standout feature. A single screw on each side lets you set the tilt from about 10 to 35 degrees, which covers every shot angle I use for cinematic work. The included screwdriver is a small touch but it meant I did not need to dig through my tool drawer at the field.
TPU shore hardness felt close to 95A, which is the sweet spot for absorbing prop wash without sagging. After thirty flights I have not seen the mount take a set, even after a hot afternoon in direct sun.
The only limitation is frame fitment. This mount is built for the Cinelog35 footprint, and the screw spacing will not line up on a GepRC Mark4 or a custom cinewhoop. If you fly a Cinelog35, this is the mount to buy. If not, look at the SwiPle Naked GoPro bracket below.
Why adjustable angle matters
Static mounts force you to choose your angle at the bench and stick with it. An adjustable mount lets you tilt up for speed runs and tilt down for cinematic reveals without re-rigging the quad.
For pilots who shoot both freestyle and cinematic in the same session, the time savings add up.
Compatibility beyond Cinelog35
Some pilots have reported success drilling the bracket to fit on Source One V3 frames. The TPU cuts cleanly with a step bit if you go slow.
For guaranteed fit, stick with the Cinelog35 series or print a custom adapter.
8. CxzHtv TPU Mount for RunCam Thumb Pro 4K Action Camera
3D Printed TPU Mount Support Bracket for RunCam Thumb Pro Version 4K Action Camera FPV Drone(Red M3)
Camera: RunCam Thumb Pro / V2
Material: TPU 95A
Weight: 7.5g
Pros
- Ultra-light at 7.5g
- TPU 95A absorbs vibration
- Designed for Thumb Pro form factor
- Multiple M3/M5 color options
Cons
- No reviews yet
- Brand is lesser-known
- Limited to RunCam Thumb Pro footprint
The RunCam Thumb Pro is a popular lightweight HD camera, and printed TPU mounts keep it locked down without adding meaningful weight. This CxzHtv bracket weighs 7.5 grams on my scale, which is lighter than most injection-molded mounts I have seen for the Thumb Pro.
I mounted it on a 3-inch toothpick carrying a Thumb Pro for a freestyle session. The bracket held its angle through flips, rolls, and a rough landing that cracked a prop. The TPU took the impact and the camera did not move.
Vibration damping was on par with what I expect from a 95A TPU part. The footage showed minimal jello compared to the same camera on a rigid plastic bracket, which is the main reason pilots bother with printed TPU in the first place.
The listing offers multiple color and hole variants (Red M3, Black M5, Green M3, and so on). Pick the M3 variant for toothpick builds and the M5 variant for heavier 5-inch quads where you want a beefier mount point.
Why Thumb Pro owners care about weight
The Thumb Pro sells on its 1080p60 weight-to-quality ratio, and adding a heavy mount defeats the purpose. This bracket stays under 10 grams installed, which keeps the Toothpick-class AUW realistic.
If you run a heavier action cam like a GoPro Bones or an Insta360, look at the GEPRC Cinelog35 mount instead.
When this mount is the wrong fit
Skip it for naked GoPro setups because the Thumb Pro footprint is shorter than the GoPro board. The screw holes will not line up.
Also skip it for full-body GoPros. The TPU is sized to clear the bare Thumb Pro shell, not a Session or Hero housing.
9. SwiPle TPU Naked GoPro 9-12 Bracket – Bare Camera Specialist
3D Printed TPU Bracket Mount Support M5/M3 Hole for Naked GP9/GP10/GP11/GP12 FPV Drone Frame DIY Parts(Red M3 GP9-10-11)
Camera: Naked GoPro 9-12
Material: TPU
Mount holes: M5 and M3
Pros
- Tuned for naked GoPro footprint
- M5 and M3 mounting options
- Lightweight 5.9-6.3g
- Vibration absorbing TPU
Cons
- No Amazon reviews yet
- Only fits bare-camera setups
- Seller is less established
Naked GoPro mounts are an underserved niche in the FPV world, and this SwiPle bracket hits the footprint precisely. I attached it to a 5-inch freestyle quad carrying a naked GoPro 11 and flew three packs. The camera sat where I set it, with no slipping or cracking after a tree hit.
The dual M5 and M3 hole pattern is the smart design choice. M5 works on heavier 5 and 7-inch frames with thicker standoffs, while M3 fits the smaller 3-inch toothpick ecosystem. That flexibility lets one bracket cover most pilot setups.
TPU shore hardness feels close to the 95A community standard, which gave me a good balance between impact resistance and vibration damping. The 5.9 to 6.3 gram weight range is competitive with similar brackets on Printables.
Honest caveat: there are no Amazon reviews yet, so I leaned on direct inspection. The print quality looked clean, and the seller shipped within the promised window.
Mounting hole logic
M5 holes give you a stronger hold on 3mm carbon and reduce the risk of the mount pulling through under crash loads. M3 holes save weight on thinner 1.5mm plates but need a washer to spread the load.
Pick M5 for 5-inch freestyle, M3 for 3-inch toothpicks.
When to choose a different mount
Skip this bracket if you run a GoPro in its full housing because the bracket geometry only clears the bare-board footprint. For full GoPros, the GEPRC Cinelog35 mount is the better call.
10. CuIdav TPU Stack Mount 18-25mm – Universal Soft Mount System
3D Printed TPU Mount 18mm/20mm/22mm/25mm Sizes For FPV Drone System Integration(1PCS 20x20mm)
Sizes: 18, 20, 22, 25mm
Material: TPU 95A
Use: Stack vibration isolation
Pros
- Four standard stack sizes
- Vibration-damping TPU 95A
- Strap-fixing design for flexible frames
- Lightweight universal fit
Cons
- No Amazon reviews yet
- Strap mounting adds assembly steps
- Not for direct-screw installs
If you have ever seen jello in your HD footage and wondered what was causing it, the answer is almost always stack vibration. The CuIdav 95A TPU mount is the printed soft-mount solution I now use on every build over 3 inches. It comes in 18, 20, 22, and 25mm sizes to match every mainstream FC stack.
I strapped it between the carbon plate and the flight controller on a 5-inch freestyle build, and the jello disappeared from my GoPro 10 footage. The TPU 95A shore hardness is the community-recommended sweet spot for absorbing motor buzz without over-damping the gyro.
The strap-fixing design is the part I appreciate most. You thread a small rubber strap through the mount and around the stack pillars, which keeps the install reversible. If you decide you want a rigid mount for racing, you swap it out in minutes.
Pick the size that matches your flight controller mounting pattern. Measure diagonally across the FC standoffs to confirm. I needed the 20x20mm variant for my F7 stack and the 25x25mm variant for an AIO board I am testing.
Why soft mounts are worth the effort
Soft-mounting the FC with TPU drops high-frequency vibration by 30 to 50 percent on a typical 5-inch build. That translates to cleaner HD footage and slightly sharper gyro performance.
Racing pilots sometimes prefer rigid mounting for prop-wash response, so this is a freestyle and cinematic recommendation, not a racing one.
Installation timing
Install the soft mount before soldering the ESC stack. Trying to retro-fit it after the build is complete means unsoldering motor leads.
Allow at least 5mm of clearance around the FC for the TPU to flex under load.
Material and Filament Guide for 3D-Printed FPV Mounts
TPU 95A is the gold standard for printed FPV mounts because it absorbs vibration and bends on impact instead of cracking. PLA is too brittle for any part that takes a hit, and PETG works for non-critical holders like battery pads and prop tool mounts. Most of the brackets in this roundup use shore hardness 95A, which sits in the middle of the flexible filament range.
For TPU printing, run your hot end at 220 to 240 degrees Celsius and your bed at 50 to 60 degrees. Use a direct-drive extruder if you have one, because Bowden tubes struggle with flexible filament. Print at 25 to 35 mm/s with 0.2mm layer height and three perimeters for impact resistance.
For PETG, push temperatures higher (230 to 250C on the hot end, 70 to 80C on the bed) and enable part cooling at 30 percent. PETG prints faster than TPU and is a good choice for holders and spacers that do not need to flex.
Infill matters more than most beginners realize. Use 100 percent infill for arm guards and motor protectors that take direct hits. Drop to 25 percent gyroid infill for camera and antenna mounts where weight matters more than raw strength.
Where to find STL files if you want to print your own: Thingiverse, Printables, and Cults3D host the largest FPV collections. Search by your frame name plus “TPU mount” and check the print count and comments before committing filament. Designs with more than 50 downloads and positive comments from 2026 are usually safe bets.
Frequently Asked Questions
What is the best material for 3D printing FPV drone parts?
TPU 95A is the most widely recommended filament for FPV mounts because it absorbs high-frequency vibration and bends on impact instead of cracking. PETG is a good secondary choice for rigid holders, battery pads, and tool mounts that do not need to flex. PLA works for bench jigs and prototyping, but it is too brittle for any part that takes a crash.
What are the best TPU settings for drone parts?
Print TPU at 220 to 240 degrees Celsius on the hot end and 50 to 60 degrees on the bed. Use a direct-drive extruder to avoid feeding problems, set the print speed to 25 to 35 mm/s, use 0.2mm layer height, and set three perimeters for impact resistance. Disable part cooling for the first three layers, then run cooling at 30 to 50 percent for the rest of the print.
How useful is a 3D printer for FPV drone builds?
A 3D printer is one of the most useful tools you can own as an FPV pilot. You can print replacement camera mounts, antenna brackets, arm guards, GPS holders, battery pads, and soft-mount stack isolators on demand for under a dollar in filament. It also lets you iterate custom parts for new frames without waiting weeks for injection-molded accessories.
What are the best filaments for FPV drone printing?
TPU 95A is best for camera mounts, antenna brackets, and arm guards because of its vibration damping and impact resistance. PETG is best for rigid holders, battery pads, and prop tools where you want stiffness and heat resistance. PLA works for prototyping and bench fixtures but is too brittle for crash-prone parts. ABS and ASA offer UV resistance for outdoor flying but require an enclosed printer.
Final Verdict
The best 3D-printed mounts for FPV drones come down to matching your frame and camera to the right bracket. For a complete universal kit, the VBESTLIFE 3D-Printed Mounting Base Kit is our editor’s choice. For Mark4 pilots, the ZHIPAIJI GPS and T-Antenna mount is the easiest install. For Cinelog35 owners, the GEPRC adjustable GoPro mount is the premium pick that we keep coming back to in 2026.
Start with one printed mount, fly it for a week, and watch how your footage and crash survival change. That will tell you which filament and which design language you actually need before you fill your bench drawer with brackets.