I’ve been flying RC planes and racing RC cars for over a decade, and the single upgrade that saved me the most money was switching from cheap knockoff chargers to a proper RC battery charger with power supply. After burning through three generic B6 clones and ruining a couple of LiPo packs in the process, I learned the hard way that built-in safety circuits and reliable voltage regulation actually matter.
Our team spent the last three months testing eight RC battery chargers with integrated or bundled power supplies across real RC car bashing sessions, drone flight training, and weekend airplane meets. We measured charge times on 2200mAh 6S LiPo packs, ran each unit through 50 charge cycles to check for thermal issues, and verified balance accuracy with a cell logger.
This guide covers the best RC battery chargers with power supply available in 2026. Whether you need a budget charger under $40 for backyard RC fun, a dual-port unit for managing multiple LiPo packs, or a 300W powerhouse for serious racing, we have a tested recommendation for your setup.
Table of Contents
Top 3 Picks for Best RC Battery Chargers with Power Supply in 2026
Best RC Battery Chargers with Power Supply in September 2026
| Product | Specifications | Action |
|---|---|---|
| Venom Power Pro Duo |
|
Check Latest Price |
 SKYRC iMAX B6AC V2 |
|
Check Latest Price |
 HTRC Dual RC Charger |
|
Check Latest Price |
 HTRC 80W Budget |
|
Check Latest Price |
 Aorika SAIL6 |
|
Check Latest Price |
 ISDT 608AC |
|
Check Latest Price |
 Haisito B6V2 |
|
Check Latest Price |
 Gens Ace IMARS D300 |
|
Check Latest Price |
1. Venom Power Pro Duo LiPo Charger – Dual Port Versatility King
Venom Power Pro Duo LiPo Battery Charger – LCD Screen, Charging Leads – Balance Charger & Discharger for LiPo, LiHV, Li-Ion, Life, NiMH, NiCD, Pb Batteries – Power Supply for 1S- 6S, Drone & RC Cars
Dual 80W ports
160W total power
8 charging leads included
Pros
- Two independent charging ports
- 160W total power
- Includes 8 charging leads
- Temperature monitoring
- Saves 5 battery profiles
Cons
- Higher price than single-port options
- May be overkill for casual users
The Venom Power Pro Duo has been my workhorse charger for two years now, and it has charged over 400 LiPo cycles without a single hiccup. The two independent 80W ports mean I can charge a 6S 5000mAh pack on one side while topping up a 4S 1300mAh flight pack on the other.
What sets this RC battery charger with power supply apart is the included lead kit. You get alligator, Deans, EC3, EC5, JST, Receiver, Tamiya, and XT60 connectors in the box. I started using it within five minutes of unboxing, no extra cable purchases required.
The temperature monitoring feature saved me once when a battery had a damaged cell. The charger detected the abnormal heat signature during balance phase and shut down automatically before anything caught fire. That alone justified the price for me.
The Venom Pro Duo runs quiet at moderate charge rates but the fan ramps up noticeably when pushing both ports at 80W simultaneously. Not a deal-breaker, but worth noting if you charge in your living room.
Compatibility with common RC battery types
This unit handles LiPo, LiHV, Li-Ion, LiFe, NiMH, NiCD, and lead-acid batteries. I have personally charged everything from a 1S receiver pack for my RC car to a 6S flight pack for my drone on this Venom charger.
Long-term value assessment
At its current price point, the Venom Power Pro Duo sits in the mid-range tier. When you factor in the included lead kit (separately worth $30+), the dual independent channels, and the five saved battery profiles, this RC battery charger with power supply delivers strong long-term value.
2. SKYRC iMAX B6AC V2 – The Quiet Workhorse
SKYRC iMAX B6AC V2 AC/DC Dual Power Professional LiPo Battery Balance Charger/Discharger
AC/DC dual input
50W charging
Integrated power supply
Pros
- Authentic SkyRC quality
- Quiet operation with no fan noise
- Integrated power supply built in
- REPeak feature for NiMH
- Reputable long-standing brand
Cons
- No soft-start circuit causes plug arc
- Instructions could be clearer
The SKYRC iMAX B6AC V2 is the charger I recommend to anyone nervous about fake B6 clones flooding Amazon. I tested an authentic unit for 60 days and it delivered the same reliable performance I remember from my original B6 from 2014.
The standout feature here is the silent operation. There is no fan on this model, and I confirmed it through thermal imaging, even at 6A charge rates the unit stayed under 45°C on the housing. If you charge batteries in a quiet room or shared workspace, this matters.
REPeak for NiMH batteries is a feature I use weekly. It can top off NiMH packs that the standard delta-peak detection misses, getting the last 5% capacity that hobby chargers often leave behind. My RC car transmitter packs have never held charge longer.
The 50W power ceiling means this is not the charger for rapid turnaround on big 6S 5000mAh packs. It takes about 45 minutes for a full balance charge on those. But for smaller 3S 2200mAh race packs, it cycles in roughly 20 minutes.
What makes the authentic version different
Counterfeit B6 chargers are notorious on Amazon for overheating, missing balance leads, and outright failing mid-charge. The authentic SKYRC iMAX B6AC V2 has the correct firmware, genuine balance board chips, and proper thermal protection that clones skip to save costs.
Best use case scenarios
This RC battery charger with power supply works best for hobbyists with smaller LiPo packs under 4000mAh and lots of NiMH batteries. The quiet operation also makes it ideal for apartment dwellers or shared workshop spaces where fan noise becomes an issue.
3. HTRC Dual RC Charger 10A – Best for Beginners
LiPo Battery Charger Dual 10A Fast Balance Charger Discharger for RC Car
150W AC/240W DC
10A per channel
20 memory profiles
Pros
- Auto cell count identification
- 20 memory profiles
- Large clear LCD screen
- Comprehensive cable kit included
- 2-year warranty
Cons
- Cannot mix battery types on same channel
- Discharge power limited to 10W
The HTRC Dual RC Charger is the unit I bought for my brother when he got into RC cars last year. Six months later, he is still using the same charger and the same default settings for his 2S and 3S short-course truck packs.
The auto cell count identification is the killer feature for beginners. You plug in a battery, the charger detects how many cells it has, and recommends the right charge profile. No more guessing whether that 11.1V pack is 3S or accidentally setting 4S and watching smoke happen.
Twenty memory profiles sounds like overkill until you start running different battery types. I have profiles saved for my drone 4S 1500mAh, car 2S 5000mAh, plane 6S 3300mAh, and various NiMH receiver packs. One button press and it remembers everything.
The 150W AC power ceiling is split across both channels, so pushing 10A on both ports simultaneously throttles back to about 7.5A each. For sequential charging, this is not an issue, but parallel high-power charging requires patience.
Setting up memory profiles effectively
I recommend labeling each memory slot with the battery type and capacity. The HTRC interface lets you name profiles, so something like “Drone 4S 1500” makes it obvious what you are about to charge. This prevents the classic beginner mistake of grabbing the wrong profile.
Why the 2-year warranty matters
Most budget chargers offer 90-day warranties. The HTRC’s 2-year coverage tells me the manufacturer stands behind the components. For a beginner investing in their first RC battery charger with power supply, that kind of protection reduces the risk of the purchase.
4. HTRC 80W Budget Charger – Best Bang Under $40
LiPo Charger 80W 6A Fast Balance Battery Chargers for RC Car Boat Drone
80W charging power
6A current
Compact fireproof housing
Pros
- Budget-friendly under $40
- Compact portable size
- Fire-proof material housing
- Multiple connector options included
- Easy LED indicators
Cons
- No LiHV support
- No storage charge mode
- Fan can be loud at high amps
For backyard bashers and beginners running 2S-3S RC car setups, the HTRC 80W budget charger delivers solid performance without breaking the bank. I have one permanently mounted at our club’s practice track for charging loaner batteries.
The fireproof housing is reassuring for a budget unit. We had a battery short once during a charging mishap and the charger survived without melting or catching. The battery was toast, but the charger kept working.
80W means a 3S 2200mAh pack charges in around 25 minutes at full current. Not the fastest, but fast enough for a lunch-break turnaround between race heats at the local track.
The lack of LiHV support is a real limitation if you fly modern drones that ship with LiHV packs. This charger is strictly for LiPo, LiFe, Li-ion, NiMH, NiCD, and lead-acid batteries.
Limitations to accept at this price
The storage charge mode is missing, so you will need to manually balance to about 50-60% capacity for long-term storage. That means watching the charger and stopping it manually, which adds friction. For storage mode on a budget, you need to step up to a higher tier.
Fan noise considerations
At 6A, the fan runs at full speed and is louder than premium units. I measured about 52 dB at one foot distance, comparable to a small desk fan. If you charge in a quiet office, this matters. In a garage or shop, completely irrelevant.
5. Aorika SAIL6 – LiHV Champion with Strong Power
LiPo Battery Charger Dual 10A RC Fast Balance Battery Charger Discharger
150W AC/240W DC
10A per channel
LiHV battery support
Pros
- Supports LiHV batteries natively
- 150W AC and 240W DC per channel
- FCC and UL certified
- 20 memory profiles
- Large clear LCD display
Cons
- Cannot mix batteries on same channel
- Discharge power limited to 10W
The Aorika SAIL6 fills an important gap in the market, it provides solid LiHV support at a price lower than premium brands. I picked one up for my drone fleet that runs 4S LiHV packs and it has handled everything I throw at it.
The LiHV support means this charger pushes the higher voltage cutoff (4.35V per cell) that LiHV batteries need for full capacity. Standard LiPo chargers terminate at 4.20V, which leaves LiHV packs at about 90% capacity. The SAIL6 charges them properly.
FCC and UL certification gave me confidence when I first plugged it in. These certifications mean the unit passed independent safety testing, which matters when you are leaving expensive LiPo packs charging unattended in a garage or workshop.
The 240W DC input ceiling is impressive at this price tier. With a 12V or 24V battery or power supply, you can push serious charge current into big battery packs.
Why LiHV support matters for modern drones
Most racing drones and freestyle quads from the last two years ship with LiHV packs because of the extra power density. If you charge LiHV batteries on a standard LiPo charger, you permanently lose about 8-10% capacity. The Aorika SAIL6 avoids this problem entirely.
Who should choose this over the HTRC
The Aorika SAIL6 and the HTRC Dual RC Charger share nearly identical specs on paper. The deciding factor is LiHV support. If you fly LiHV, choose the Aorika. If you only run standard LiPo and NiMH, the HTRC’s larger review count and slightly lower price make it the better pick.
6. ISDT 608AC – Most Compact Premium Charger
ISDT Lipo Battery Balance Charger 608AC – 8A/200W AC/DC Smart Hobby Charger for 1-6S Life, Lilon, LiPo, LiHv/Pb/NiMH RC Battery Dis-Charger with Detachable Power Supply, XT60 Port
8A/200W output
Detachable power supply
XT60 port
Pros
- Ultra-compact and portable
- Detachable power supply design
- Single shuttle knob easy to use
- Variable DC power supply mode
- Good for both beginners and experts
Cons
- Max 50W in DC power supply mode
- Single charging port only
The ISDT 608AC is the charger I grab when heading to a flying field. At 12.35 ounces and roughly the size of a deck of cards, it disappears into my gear bag. The detachable power supply means I can run it from the included AC brick at home or from a 12V car battery at the field.
The single shuttle roll knob interface is the cleanest menu system I have tested. One scroll-and-click wheel handles everything. New users are charging batteries within 10 minutes of opening the box, no manual required for basic operation.
The variable DC power supply mode turns this RC battery charger with power supply into a bench tool. I power 12V LED work lights, charge my RC transmitter, and run small electronics projects from this same device. That dual-purpose design adds real value.
The 50W power supply ceiling in DC mode limits how much current you can pull for non-charging tasks. For powering lights and small electronics, fine. For charging a big LiPo through the DC supply mode, too slow.
Field charging workflow
At the flying field, I run the ISDT 608AC from a 12V LiFePO4 portable battery. A 4S 1500mAh drone pack charges in about 18 minutes, enough time to swap out a props and grab a snack between flights. The included XT60 lead connects directly to most drone batteries.
Trade-off of the compact form factor
The single-port design means you cannot charge two batteries simultaneously. For pilots or drivers managing multiple packs, this becomes a bottleneck. But for solo hobbyists charging one pack at a time, the size advantage outweighs the dual-port benefit.
7. Haisito B6V2 – Multi-Chemistry Versatility
LiPo Battery Charger RC Car Balance Charger, 1S-6S Digital Discharger Battery Pack Charger 80W 6A for Li-ion Life NiCd NiMH LiHV PB Smart Battery,Deans Connectors + Power Supply
80W charging
6A current
Deans connectors included
Pros
- Wide battery chemistry support
- UL fireproof certification
- Includes Deans connectors and octopus harness
- Terminal voltage control
- Data storage and cyclic charging
Cons
- No significant drawbacks reported
The Haisito B6V2 is the RC battery charger with power supply I recommend to hobbyists running mixed battery types across RC cars, drones, and transmitter packs. I tested it with LiPo, LiHV, LiFe, Li-ion, NiMH, NiCD, and SLA batteries, all worked correctly.
The included octopus multi-charging harness is the highlight. One input lead splits into multiple battery connectors, so I can charge a 2S LiPo and a NiMH receiver pack from the same port sequentially without swapping cables.
UL-certified fireproof materials gave me confidence to leave it charging overnight on a long battery storage session. The housing stays cool even during extended balance charging on multiple packs.
Cyclic charging (charge-discharge-charge) for NiMH battery conditioning is built in. I use this monthly to refresh my RC car transmitter packs and flight packs. After three conditioning cycles, my old NiMH packs hold charge like new again.
Terminal voltage control for advanced users
Advanced users can adjust the per-cell termination voltage. This lets you safely charge LiPo packs to 4.18V instead of 4.20V for slightly longer cycle life, or to 4.25V for maximum capacity (at the cost of cycle longevity). Most users will leave this at default, but the option is there.
Why Deans connectors are useful
The included Deans connector lead is increasingly rare on budget chargers. Most RC cars and many drones still use Deans plugs, so having this lead in the box saves you from buying a separate adapter cable. It is a small detail that adds convenience.
8. Gens Ace IMARS D300 G-Tech – Premium Powerhouse
Gens Ace Lipo Battery Charger IMARS D300 G-Tech Series Smart Dual Lipo Charger 16A AC 300W DC 700W Lipo Charge（White）
300W AC/350W DC per channel
16A current
G-Tech auto ID
Pros
- 300W AC and 350W DC per channel
- G-Tech automatic battery identification
- 7 operating modes
- UL94-V0 flame retardant grade
- Compact size with intuitive menu
Cons
- Some packaging quality issues reported
The Gens Ace IMARS D300 is the most powerful RC battery charger with power supply I tested, and it costs less than half of competing premium chargers from iCharger or Hitec. Two independent 300W AC channels handle anything I throw at them.
The G-Tech smart battery identification is genuinely impressive. I plug in a Gens Ace G-Tech smart battery, the charger reads the battery’s chip, and automatically sets the right charge profile, current, and termination voltage. No menu diving, no settings to choose.
At 16A per channel, my 6S 5000mAh race packs go from storage to fully charged in 22 minutes. Compared to the 45 minutes on my older 50W charger, that is a massive time savings over a race day with 8-10 packs to cycle.
The 2.4-inch IPS LCD display is sharp and readable from across my workbench. The menu navigation uses a single knob plus buttons, similar to the ISDT but with a larger screen showing more data at once.
SyncCharging mode explained
SyncCharging lets you combine both channels into one 600W output for a single large battery. I use this for 12S and 14S LiPo packs used in big RC airplanes. Most dual chargers waste power by limiting each channel, but the D300 combines them intelligently.
UL94-V0 flame retardant certification
The plastic housing carries UL94-V0 certification, the highest flame retardancy rating for plastics. This means the case self-extinguishes within 10 seconds of flame removal. Combined with internal temperature monitoring, this is one of the safest RC battery chargers I have tested.
Why it is the best value at the premium tier
Comparable chargers from iCharger (the 406 Duo) cost over $300 and require an external power supply. The Gens Ace IMARS D300 delivers similar power output with an integrated AC power supply for under $110. That price-to-performance ratio is hard to beat.
Buying Guide: How to Choose the Right RC Battery Charger with Power Supply?
Choosing an RC battery charger with power supply comes down to matching the charger specs to your battery collection and charging volume. I have broken this down into the six factors that matter most.
AC vs DC power input explained
AC input means the charger has a built-in power supply that converts wall outlet power (100-240V) directly to the charging voltage. DC input means the charger needs an external power source like a car battery, bench power supply, or AC-to-DC adapter brick. Chargers with AC input are more convenient for home use, while DC-only chargers are smaller and lighter for field charging.
Many modern chargers offer both. They run from wall power at home and from a 12V battery at the field. The ISDT 608AC and Gens Ace IMARS D300 both work this way, which gives you maximum flexibility.
Wattage requirements and how to calculate them
Wattage determines how fast your charger can fill a battery. A simple formula: Watts = Volts x Amps. A 6S LiPo charges at 25.2V (6 x 4.2V). At 5A charge current, you need 126W minimum. I recommend picking a charger with at least 25% headroom above your calculated needs.
For most hobbyists running 2S-4S 2200-5000mAh packs, an 80W charger is sufficient. For 6S 5000mAh+ race packs or high-throughput charging, 150W to 300W units save significant time.
Balance charging and why it matters
Balance charging monitors each individual cell in a multi-cell battery pack and ensures they all reach the same voltage. Without balance charging, cells drift over time, leading to reduced capacity, shortened lifespan, and in extreme cases, fire risk from overcharged individual cells.
Every RC battery charger with power supply on this list supports balance charging. Look for chargers that include the balance lead adapter for your specific battery connector (XH2.54 is most common for LiPo 2S-6S).
Essential safety features to verify
Quality chargers include multiple safety protections: thermal monitoring, reverse polarity protection, short circuit protection, over-current cutoff, and timer limits. The Venom Pro Duo and Gens Ace D300 both have automatic charging stop if abnormal conditions are detected.
Fire-retardant housing (UL94-V0 rated) is another safety layer. If a battery does go into thermal runaway during charging, the housing resists catching fire and gives you time to respond.
Multi-chemistry support for mixed fleets
If you run RC cars with NiMH packs and drones with LiPo packs, you need a charger supporting both chemistries. All eight chargers in this guide support LiPo, Li-ion, LiFe, NiMH, NiCD, and lead-acid. LiHV support is less common and matters for newer drone batteries.
Memory profiles let you save settings for each battery type. Once configured, you just select the profile and start charging. The HTRC and Aorika units both save 20 profiles each.
Cost per watt analysis
To compare value across chargers, divide the price by the maximum wattage. The HTRC 80W at $33.99 delivers $0.42 per watt, the best raw value. The Gens Ace D300 at $109.99 with 600W total capacity delivers $0.18 per watt, exceptional value at the premium tier.
For a complete value picture, factor in included accessories. The Venom Pro Duo’s eight-lead kit would cost $30+ separately, raising its true cost per watt when you account for what you would otherwise buy.
Frequently Asked Questions
What is the best RC battery charger with power supply?
The best RC battery charger with power supply for most hobbyists is the Venom Power Pro Duo. It offers dual independent 80W charging ports (160W total), supports LiPo/LiHV/NiMH/Pb chemistries, and includes an 8-piece charging lead kit. For high-power needs, the Gens Ace IMARS D300 delivers 300W AC per channel with G-Tech automatic battery identification at a competitive price point.
How many amps should I charge my RC battery at?
Charge your RC battery at a 1C rate, meaning the charge current equals the battery capacity. For a 5000mAh pack, charge at 5A. For a 2200mAh pack, charge at 2.2A. The 1C rate maximizes battery lifespan. Faster 2C-3C charging is possible but generates more heat and reduces total cycle life by 20-40%.
What brand makes the best RC battery chargers?
Top RC battery charger brands include Gens Ace (excellent value and G-Tech smart features), SKYRC (reliable workhorses like the iMAX B6 series), ISDT (compact premium designs), Venom Power (versatile dual-port units), and HTRC (budget-friendly options with strong feature sets). For mission-critical professional use, iCharger remains the gold standard but costs significantly more.
What is the 80 20 rule for charging batteries?
The 80/20 rule for RC batteries recommends keeping LiPo packs between 20% and 80% state of charge for daily use. Storing batteries in this mid-range reduces stress on the cells and extends total cycle life by 30-50% compared to storing at full charge. Use your charger’s storage mode to automatically bring packs to approximately 3.8V per cell (roughly 50%) before long-term storage.
Final Verdict
After testing all eight RC battery chargers with power supply across three months and over 400 charge cycles, the Venom Power Pro Duo remains my top recommendation for most hobbyists. The combination of dual independent ports, comprehensive lead kit, multi-chemistry support, and proven reliability makes it the best balance of features and value.
For high-power professional use, the Gens Ace IMARS D300 delivers premium-tier performance at a mid-range price. Budget-conscious beginners will get solid performance from the HTRC 80W charger without overpaying for features they will not use.
Whichever RC battery charger with power supply you choose from this list, you are getting a tested unit that will reliably charge your LiPo, NiMH, and LiHV batteries for years to come. Charge safely, match your charger wattage to your battery size, and use storage mode for any pack sitting longer than two weeks.