The DJI RS 3 changed how I shoot stabilized video. Its automated axis locks and dual-layered quick release plate make it one of the best gimbal stabilizers on the market. But out of the box, you are only scratching the surface of what this rig can do.
After spending months building out my kit, I can tell you the right accessories completely transform how you handle, power, monitor, and transport your gimbal. From sling handles that save your forearms to vertical mounts for social media content, the best accessories for DJI RS 3 fill the gaps DJI left open.
Our team tested 12 accessories across real shoots including weddings, music videos, and documentary work. We focused on compatibility, build quality, and genuine workflow improvements. Whether you shoot with the RS 3, RS 3 Pro, or RS 3 Mini, this guide covers every add-on worth your money in 2026.
Table of Contents
Top 3 Picks for DJI RS 3 Accessories in 2026
SmallRig Adjustable Sling Handgrip
- 17.6lb load capacity
- NATO clamp quick release
- Ergonomic curved design
DJI RS 3 Accessories in September
1. SmallRig Adjustable Sling Handgrip – Best Overall Handle
SmallRig Adjustable Sling Handgrip Gimbal Sling Handle, 17.6lb Load
Max Load 17.6lb
NATO Clamp Quick Release
310g Weight
Silicone and Aluminum
Pros
- Ergonomic curved design fits comfortably
- Excellent stability for low angle shots
- Easy NATO clamp attachment
- Supports 17.6lb load capacity
- Multiple mounting points
Cons
- Cold shoe mount faces downward
- May scratch on black finish
This sling handle became the first thing I bolted onto my RS 3 and it has not come off since. The NATO clamp slides on and locks with an anti-removal stud, so there is zero wobble during fast-paced shooting. I used it across a two-day wedding shoot and my forearms thanked me.
The ergonomic curve sits naturally against your palm. SmallRig nailed the angle so that low-mode shots feel controlled rather than awkward. The silicone overmold grip gives you confidence even when your hands are sweaty after hours outside.
Build quality is where this handle justifies every penny. The aluminum alloy body with silicone accents feels like a professional cinema accessory, not a budget add-on. At 310 grams, it adds noticeable but manageable weight to your rig.
The rosette joint allows 180 degrees of adjustment, which I used constantly when switching between eye-level tracking and ground-level action shots. Two cold shoe mounts let you attach a wireless mic receiver and a video light simultaneously.
Best Shooting Scenarios
This handle shines for event videography, documentary work, and any situation where you operate the gimbal single-handedly for extended periods. The QD socket on the bottom also lets you attach a neck strap for additional support between takes.
I found it especially useful for music video production where you need dynamic movement. The added leverage point transforms the RS 3 from a two-handed rig into something closer to a steadicam arm without the price tag.
Compatibility Notes
SmallRig designed this for the full DJI RS series including RS 5, RS 4, RS 4 Pro, RS 3, RS 3 Pro, RS 2, and RSC 2. Note that it does not fit the RS 3 Mini or RS 4 Mini, which need the smaller plastic variant reviewed below.
The NATO clamp matches the rail on the side of the RS 3 perfectly. No adapters or modifications needed. Just slide, lock, and shoot.
2. SmallRig Camera Monitor Mount – Best Monitor Solution
SmallRig Adjustable Camera Monitor Mount with Quick Release NATO Clamp
170 Degree Tilt
1.5kg Max Payload
NATO Clamp
Anti-Twist Design
Pros
- Sturdy well-built construction
- Anti-twist design keeps monitor steady
- Easy quick-release NATO clamp
- 170 degree tilt adjustment
- Cold shoe mounts top and bottom
Cons
- Cannot swivel without losing contact
- 1.5kg payload may limit heavier monitors
Adding an external monitor to my RS 3 changed how I frame shots in bright sunlight. This SmallRig monitor mount clamps directly to the NATO rail and holds my 5-inch field monitor rock solid. The anti-twist design with locating pins and a silicone pad prevents any rotation during movement.
I tested this with a monitor weighing about 400 grams and had zero droop over a full day of shooting. The 170-degree tilt range via thumbscrew lets you position the screen at any angle, which matters when you are shooting from the hip or overhead.
The quick-release NATO clamp means you can pull the monitor off between setups in seconds. No tools, no fumbling. This saves real time on set when you are moving between tripod work and gimbal work.
One thing to watch is the maximum payload of 1.5 kilograms. My 5-inch monitor with its battery was fine, but larger 7-inch monitors with V-mount plates might push the limit. Check your monitor weight before committing.
Mounting Flexibility
Beyond monitors, I used the cold shoe mounts to attach a wireless video transmitter and a small LED panel. The top and bottom cold shoes give you two accessory mounting points without adding extra arms or brackets.
The compact structure matches the gimbal design language perfectly. It looks like it belongs there rather than being bolted on as an afterthought.
Who Should Buy This
If you shoot with a mirrorless camera and struggle to see your gimbal screen in outdoor light, this monitor mount solves that problem immediately. It is essential for focus pulling and framing accuracy on professional shoots.
Documentary and run-and-gun shooters benefit the most. Being able to monitor your framing while moving transforms your confidence in each take.
3. Neewer Adjustable Sling Handle Grip – Best Value Alternative
NEEWER Adjustable Sling Handle Grip Compatible with DJI Ronin RS4 RS3 Mini RS 3 Pro RS 2 RSC 2 Gimbal Stabilizer for Low Angle Shot, Max Load 13.2lb, ST49
Max Load 13.2lb
Silicone Grip
NATO Clamp
Two Cold Shoes
Pros
- Excellent value compared to premium brands
- All-metal construction
- Spring-loaded locking pin
- Comfortable non-slip silicone grip
- Reduces arm fatigue
Cons
- Small nub may interfere with cages
- Not Prime eligible
I picked up the Neewer sling handle as a backup for a second camera operator and ended up being genuinely impressed. The all-metal construction feels nearly identical to the SmallRig at a lower price point. For budget-conscious shooters building their first DJI RS 3 accessories kit, this is hard to beat.
The spring-loaded locking pin prevents accidental detachment, which gave me peace of mind during a fast-paced event shoot. The 180-degree rosette adjustment works smoothly and holds position firmly once locked.
The silicone grip surface is comfortable and tacky enough for confident handling. I shot a 6-hour conference with this handle and noticed significantly less arm fatigue compared to operating the gimbal bare.
Mounting options are generous. Multiple quarter-inch and three-eighth-inch threaded holes plus two cold shoe adapters let you build out a capable rig without buying additional mounting accessories.
How It Compares to SmallRig
The main difference I noticed is the QD socket. SmallRig includes one for neck strap attachment while Neewer does not. The Neewer grip also has a small nub that can interfere with some cage attachments, so check your setup first.
That said, the Neewer handle delivers 90 percent of the SmallRig experience at roughly 80 percent of the cost. For most shooters, that trade-off makes sense.
Ideal Use Cases
This handle suits content creators, vloggers, and independent videographers who want professional handling without the premium price tag. It is also great as a second handle for a camera assistant or B-camera operator.
The 13.2-pound load capacity covers most mirrorless and DSLR setups. Just note it ships with standard shipping rather than Prime.
4. SmallRig Plastic Sling Handgrip – Best for RS 3 Mini
SmallRig Plastic Sling Handgrip for DJI RS 4 Mini/3 Mini, Lightweight
RS 3 Mini Only
220g Lightweight
Rosette Joint
NATO Clamp
Pros
- Very light at only 220g
- Ideal for mini gimbals
- Comfortable rubberized grip
- Secure NATO clamp
- Good value vs OEM DJI handle
Cons
- Small amount of play in handle
- Cannot charge gimbal while attached
- Grip could be tackier
If you own the RS 3 Mini rather than the full-size RS 3, this is the sling handle designed specifically for your gimbal. At just 220 grams, it adds almost no weight to the already lightweight Mini. The plastic and aluminum hybrid construction keeps things light while maintaining durability.
I tested this on my RS 3 Mini during a travel vlog shoot through a city, and the weight savings mattered. After walking for three hours, the lighter setup made a real difference compared to mounting a heavier aluminum handle.
The rosette joint gives you 180 degrees of angle adjustment. The NATO clamp with anti-removal stud slides onto the Mini rail and locks securely. Two cold shoe mounts on top and side let you add a microphone or light without extra hardware.
SmallRig updated this version to resolve the slippy grip problem from earlier iterations. The rubberized surface is better now, though some users still report a small amount of play in the handle joint. I noticed it but did not find it distracting during actual shooting.
RS 3 Mini vs Full RS 3 Compatibility
This handle fits only the DJI RS 4 Mini and RS 3 Mini. It will not fit the full-size RS 3, RS 3 Pro, or RS 2. The Mini has a different rail system and smaller form factor that requires dedicated accessories.
If you own both a Mini and a full-size RS 3, you will need separate handles for each. This is a common source of confusion in the DJI accessories ecosystem.
When to Choose This Over Alternatives
The RS 3 Mini is popular among content creators and vloggers who prioritize portability. This handle matches that philosophy by keeping your kit light and travel-friendly.
It is roughly half the price of the OEM DJI handle while offering similar functionality. For budget builds, it is the obvious choice.
5. SmallRig Dual Handle Handgrip – Best Two-Handed Operation
SMALLRIG Dual Handle Handgrip for DJI RS 5/ RS 4 /RS 4 Pro/RS 3/ RS 3 Pro
Dual NATO Rails
Two-Handed Grip
Inverted Mode
Cold Shoe Ports
Pros
- Makes RS feel like Ronin M two-handed operation
- Excellent stability and reduces fatigue
- Comfortable for long sessions
- Disassembles for easy storage
- Multiple mounting points
Cons
- Reduces mounting real estate underneath
- Some prefer ring grip for heavy builds
The dual handle transforms the RS 3 from a single-handed stabilizer into something that feels like the old DJI Ronin M. Both hands grip the side rails, giving you far more control and stability for heavier camera builds.
I used this setup with a Sony A7S III and a heavy cinema lens during a documentary shoot. The two-handed grip distribution made a noticeable difference in how steady my footage looked over long takes.
The dual NATO rails allow horizontal adjustable positioning, so you can set the handle width to match your shoulder span. The system also supports inverted mode for low-angle shots where you flip the gimbal upside down.
When you need to pack up, the whole assembly breaks down into four parts for storage. This matters if you are traveling with a compact camera bag rather than a full production case.
Weight Distribution and Fatigue
The dual handle weighs 551 grams, which adds weight to your rig. However, the trade-off is that you are now distributing the load across both arms instead of one. For shoots lasting more than two hours, this is a net win for comfort.
Cold shoe ports on both arms let you mount accessories on either side. I ran a wireless mic on the left handle and a monitor arm on the right without any interference.
What to Consider Before Buying
The main drawback is that the dual rails take up mounting real estate underneath the gimbal. If you run a complex rig with focus motors and cable management underneath, check clearance first.
Some users with very heavy cinema camera builds mentioned preferring a ring grip instead. The dual handle works best with mirrorless and mid-size DSLR setups.
6. DIFESURO RS3 Vertical Camera Mount – Best for Social Media
RS3 Vertical Camera Mount,Robust Portrait Mounting Solution Compatible with DJI RS 2/RS 3/RS3 PRO for IG YouTube Shorts Tiktok Video Extended Vertical Shooting
Vertical Shooting
RS 2/RS 3/RS 3 Pro
100g Weight
1.5kg Max Load
Pros
- Lightweight and easy to install
- Perfect for social media content
- Sturdy well-built construction
- Quick horizontal-vertical switching
- Works with Sony FX3
Cons
- May sacrifice some Pro line interface options
Vertical video is not going away. Between TikTok, Instagram Reels, and YouTube Shorts, shooting portrait orientation with a gimbal is a real need. This vertical mount replaces the standard camera plate on your RS 3 and lets you shoot straight into portrait mode.
I tested it with a Sony FX3 for a client’s social media campaign and it worked perfectly. The mount holds the camera securely in vertical orientation while maintaining gimbal balance across all three axes.
Installation is straightforward. You remove the original DJI camera mounting plate and install the vertical mount in its place. After that, rebalance your camera and you are ready to shoot portrait content.
The ability to switch between horizontal and vertical orientations quickly is a major workflow advantage. No more flipping footage in post or dealing with cropped vertical exports from horizontal footage.
Social Media Workflow Benefits
For content creators who produce both horizontal and vertical content, this mount eliminates a major friction point. You can shoot vertical natively and maintain full gimbal stabilization without any hacks or DIY solutions.
The lightweight design at just 100 grams means it does not throw off your gimbal balance significantly compared to heavier L-bracket solutions.
Pro Line Considerations
If you shoot with the RS 3 Pro, be aware that this mount may sacrifice some interface options from the original plate. Users noted this trade-off but found the vertical shooting capability worth it for social media work.
The mount is compatible with DJI RS 2, RS 3, and RS 3 Pro but not the RS 3 Mini. Check your gimbal model before ordering.
7. SmallRig Metal Phone Mount with Baseplate – Best Phone Monitoring
SMALLRIG Metal Phone Mount with Baseplate for Arca-Swiss,Compatible for DJI RS 4 Mini & RS 3 Mini, Phone Mount Adapter Support Free Adjustment Joints, Phone Tripod Mount for iPhone 17/16/15-5338
RS 4 Mini and RS 3 Mini
Arca-Swiss
85g Weight
Cold Shoe Mount
Pros
- Endlessly useful mounting options
- Holds phone securely
- Great metal construction
- Easy landscape-portrait switching
- Lightweight and portable
Cons
- May have tight fit with some non-Arca devices
Sometimes you do not need a full external monitor. Mounting your phone to the gimbal gives you a larger screen for framing without the cost of a dedicated field monitor. This SmallRig phone mount with baseplate handles that beautifully.
I used my iPhone as a monitoring screen during a behind-the-scenes shoot and it worked surprisingly well. The aircraft-grade aluminum construction with anti-slip silicone padding held my phone securely even during fast gimbal movements.
The tool-free rotation mechanism lets you flip between landscape and portrait in seconds. This is incredibly handy when you need to switch between horizontal video and vertical social media content on the same shoot.
The phone grip range accommodates devices from 64mm to 100mm wide, which covers everything from an iPhone SE to the largest Pro Max models and most Samsung devices. The Arca-Swiss compatibility also means you can move the same phone mount between your gimbal and tripod.
Versatility Beyond the Gimbal
This mount is not limited to gimbal use. I used it on a tripod, a suction cup car mount, and a desk stand. The Arca-Swiss baseplate makes it compatible with a wide range of mounting systems.
The dedicated cold shoe mount lets you attach a small microphone or video light directly to the phone mount, creating a compact vlogging rig.
Compatibility Notes
This mount is designed for the DJI RS 4 Mini and RS 3 Mini specifically. If you own the full-size RS 3, check whether the baseplate dimensions match your gimbal quick release system.
Some users reported an extremely tight fit with non-Arca Swiss devices. If you use third-party clamps, test the fit before relying on it during a shoot.
8. SmallRig Extended Quick Release Plate Adapter – Best for Heavy Cameras
SMALLRIG Camera Extended Quick Release Plate Adapter for DJI RS 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro & for Ronin-S Gimbal – 3031
1.6 inch Longer Than Stock
3/8-16 and 1/4-20 Screws
Counterweight Thread
Rubber Pads
Pros
- Perfect for heavy cameras like FX6
- Essential for balancing large builds
- Counterweight thread on rear
- Anti-twisting dual screw design
- Measurement scale for balance
Cons
- Locking pin may jam on some gimbals
- May have sliding track issues on RS 3 Pro
If you shoot with a larger camera body, balancing on the stock DJI quick release plate can be a nightmare. This extended plate from SmallRig adds 1.6 inches of adjustment room, which is often the difference between a balanced rig and a frustrating one.
I struggled to balance a BMPCC 4K with a heavy lens on my RS 3 Pro until I installed this plate. The extra length gave me the leverage I needed to find proper center of gravity balance across all three axes.
The anti-twisting design features both 3/8-16 and 1/4-20 camera mounting screws. This prevents your camera from rotating on the plate during aggressive gimbal movements, which is a real problem with single-screw plates.
A counterweight thread on the bottom rear lets you add an optional weight to fine-tune balance. This is essential when using front-heavy cinema lenses that shift your center of gravity forward.
Cameras That Benefit Most
This plate is a must-have for Sony FX6, RED Komodo, Canon C100/C200/C300, and BMPCC 4K/6K users. Any camera with a deep body or long lens combination will benefit from the extra adjustment range.
The rubber pads on top protect your camera body from scratches and twisting. Measurement markings on the plate help you note your balance position for quick repeat setups.
Potential Fit Issues
Some users reported the locking pin jamming on certain gimbal models, requiring minor modification. Others noted issues with the sliding track on the RS 3 Pro adjustment dial. These seem to be isolated incidents rather than widespread problems.
The plate is red-anodized, which stands out visually on an all-black gimbal. Some people love the accent color, others prefer stealth. Either way, the functionality is what matters.
9. SmallRig Power Supply Base Plate – Best for Long Shoots
SMALLRIG Power Supply Base Plate for DJI RS 2/RS 3 Pro/RS 4 Pro/RS 5 Gimbal
V-Mount Power
Quick Release Cartridge
60W Output
For RS 2/RS 3 Pro
Pros
- Game-changer for long shoots
- Enables continuous V-mount power
- Quick-release NATO design
- Works with DJI LiDAR and Focus Pro
- Essential for Tilta Float
Cons
- Supplied cable may be short
- Connectors may loosen with use
- Safety latch may not fit RS 4
Running out of gimbal battery mid-shoot is a problem every professional has faced. The SmallRig Power Supply Base Plate solves this by letting you run your RS 3 Pro from an external V-mount battery for effectively unlimited runtime.
I tested this during a 12-hour corporate event shoot where swapping internal batteries would have meant missing key moments. With a V-mount battery connected through the base plate, the gimbal ran continuously without interruption.
The base plate employs a quick-release cartridge design with NATO compatibility for extra stability. It also integrates with SmallRig’s Sling Handgrip 3028 and Dual Handgrip 3027, so you can build a complete professional rig around it.
One OB302 port powers the DJI stabilizer via a D-tap battery while the other outputs up to 60W to charge a SmallRig battery plate. This means you can power both the gimbal and additional accessories from a single V-mount source.
Professional Rig Integration
This base plate works with the DJI LiDAR focus handle and Focus Pro setup, making it essential for cinema-style builds. Users also reported it being necessary for Tilta Float upgrades on the RS 3 Pro.
Multiple mounting points at the bottom include two 1/4-20 and one 3/8-16 threaded holes. These fit DJI car shooting suction mounts, stabilizer tripods, and Manfrotto quick release plates.
What to Watch For
A few users reported that both connectors came loose with minimal use, suggesting possible quality control variations. The supplied cable was also described as too short for some configurations. Consider a longer D-tap cable if you mount the battery on a belt or backpack.
The safety latch reportedly does not fit on the regular RS 4. This plate is designed for RS 2, RS 3 Pro, RS 4 Pro, and RS 5. Verify compatibility with your specific gimbal.
10. SmallRig Carbon Fiber Extension Pole – Best for Creative Angles
SmallRig Gimbal Extension Pole, 15”/37cm Carbon Fiber Gimbal Extension Arm
15 inch Reach
Carbon Fiber
6kg Max Load
275g Weight
Pros
- Outstanding comfortable extension pole
- Very lightweight carbon fiber
- Opens creative shooting angles
- Well built with anti-slip grip
- Tripod mountable bottom
Cons
- One report of gimbal damage
- Can be finicky to attach
- May not fit RS 5
The extension pole changed how I think about gimbal shooting angles. At 15 inches, it gives you the reach to get low-mode shots without lying on the ground, high-angle perspectives above crowds, and creative moves like shooting through car windows.
The carbon fiber construction keeps the weight at just 275 grams while supporting a 6-kilogram maximum load. I barely noticed the pole was attached during a music video shoot where I used it for sweeping overhead crane-style moves.
Anti-deflection baffles and anti-slip padding on the top adapter prevent the gimbal from loosening or rotating during angled shooting. This is the kind of detail that separates a serious tool from a cheap accessory.
The bottom of the pole has a 1/4-20 threaded hole for direct tripod mounting. This lets you convert the pole into a mini jib or boom arm by attaching it to a tripod or C-stand.
Creative Applications
I used this pole for tracking shots through crowded event spaces where holding the gimbal at chest level would have meant bumping into people. Extending the gimbal above the crowd gave me clean tracking footage that would have been impossible otherwise.
It also works for car mount shots through windows, low-mode running shots, and elevated establishing shots. The 15-inch reach opens up angles that simply are not possible with a standard handheld grip.
Compatibility and Safety
The pole is designed for DJI RS 4 Mini, RS 4, RS 4 Pro, RS 3, RS 3 Pro, RS 3 Mini, and RS 2. It includes a dedicated adapter plate for the RS 3 Mini. One user reported it does not fit the RS 5, so check your model.
One isolated incident of gimbal damage due to a defective screw fitment was reported. Always verify the tightness of the connection before shooting and test with a lighter camera first if you have any concerns.
11. Fotga RS Upper Quick Release Plate – Best Budget Spare Plate
Fotga RS Upper Camera Quick Release Plate for DJI Ronin RS 5 / RS3 / RS 3 Mini Pro/RS 2 / RSC 2 / RS 4 / RS 4 Pro/RS 4 Mini Gimbal Stabilizer DSLR Mirrorless Camera Compatible Arca Swiss Tripod
Arca Swiss Compatible
21g Ultralight
D-Ring Lock
1/4-20 Screw
Pros
- Works as perfect RS 3 Mini replacement
- Arca Swiss compatible for tripod switching
- Identical to original DJI plate
- Great value as spare
- D-ring lock for easy mounting
Cons
- May be slightly smaller than expected
- Only 3 month warranty
Sometimes you just need a spare quick release plate. Having one pre-mounted to each camera body in your kit saves time when swapping between cameras on a gimbal. At this price point, buying two or three is a no-brainer.
I keep one of these on my Sony A7 IV and another on my Fuji X-T5 so I can switch cameras on the RS 3 without rebalancing from scratch. The Fotga plate is functionally identical to the stock DJI plate at a fraction of the cost.
The Arca Swiss compatibility is the real selling point. You can move your camera between the gimbal and an Arca Swiss tripod head without changing plates. This streamlines your entire workflow if you use Arca Swiss tripods.
The D-ring lock at the bottom lets you tighten and loosen the plate by hand without tools. The 1/4-20 screw has 22.3mm of travel for positioning adjustment. At 21 grams, the plate adds zero noticeable weight to your camera body.
As a Replacement Part
If you lost or damaged your original DJI quick release plate, this is the most affordable replacement option. Users report it fitting perfectly on RS 3 Mini, RS 3, and RS 3 Pro gimbals.
The soft cushion at the bottom protects your camera from scratching. Build quality and stability match the OEM plate according to multiple user reviews.
When This Makes Sense
Multi-camera shooters benefit most from having spare plates. Wedding videographers who run two or three camera bodies through the same gimbal during a shoot will save significant time.
The 3-month warranty is shorter than branded alternatives, but at this price point, most users will not need to use it. The plate either fits or it does not, and reviews confirm it fits.
12. DJI RS Mini Quick-Release Plate – Best OEM Replacement
DJI RS Mini Quick-Release Plate
RS 3 Mini Only
ARCA Standard
Dual-Layered
OEM DJI Part
Pros
- Perfect fit for DJI RS 3 Mini
- Excellent OEM quality and compatibility
- ARCA standard for tripod switching
- Ideal replacement for lost original
- Curved placement guide
Cons
- Not water resistant
- Limited to RS 3 Mini only
Sometimes you want the genuine OEM part rather than a third-party alternative. This is the official DJI RS Mini Quick-Release Plate designed specifically for the RS 3 Mini gimbal. If you lost your original plate, this is the exact replacement.
The dual-layered design follows the ARCA standard, which means you can switch between your gimbal and any Arca Swiss tripod head without changing plates. The curved placement guide on the upper plate secures your camera further during mounting.
I recommend this for RS 3 Mini owners who want guaranteed compatibility without any fitment concerns. Third-party plates work fine for most people, but some users prefer the peace of mind of an OEM part.
What Is Included
The package includes the RS Mini Quick-Release Plate, a D-Ring Camera Mounting Screw (1/4-20), and a backup 1/4-20 screw. Having the backup screw is thoughtful since small camera screws are notoriously easy to lose on set.
The plate supports the ARCA standard, making it compatible with Arca Swiss tripod heads and L-brackets. This is the same plate that ships with the RS 3 Mini, so you know exactly what you are getting.
OEM vs Third-Party
The Fotga plate reviewed above is a solid budget alternative that costs less and offers similar functionality. The main reason to choose the OEM DJI plate is if you want the exact same part that came with your gimbal, or if you had a bad experience with third-party accessories.
Both options cover the same basic need. The choice comes down to brand preference and budget.
How to Choose the Right DJI RS 3 Accessories?
Building out your DJI RS 3 kit does not mean buying everything at once. Here is how to prioritize based on your shooting style and budget.
Know your gimbal model first. The RS 3, RS 3 Pro, and RS 3 Mini have different accessory ecosystems. Many accessories fit multiple models through the NATO rail system, but some are model-specific. Always check compatibility before purchasing. This is the number one pain point we found in community forums, where users struggle to figure out which RS 2 accessories work with RS 3.
Prioritize handling improvements. A sling handle or dual grip should be your first purchase. These accessories reduce arm fatigue and improve shot stability, which directly impacts your footage quality. The SmallRig Sling Handgrip is our top pick for full-size RS 3 owners.
Consider your power needs. If you shoot events or long-form content, the stock battery will eventually become a bottleneck. The SmallRig Power Supply Base Plate with a V-mount battery gives you effectively unlimited runtime.
Think about monitoring. If you shoot in bright outdoor conditions, adding a monitor mount or phone mount improves your ability to frame and focus accurately. Budget phone mounts work well for casual use, while dedicated monitor mounts suit professional work.
Match accessories to your camera. Heavy cinema cameras need the extended quick release plate for proper balancing. Lighter mirrorless cameras work fine with stock plates. Vertical shooters need a dedicated vertical mount for social media content.
Watch the weight. Every accessory adds grams to your rig. For travel and vlogging, prioritize lightweight options like the SmallRig Plastic Sling Handgrip at 220g. For professional cinema builds, the added weight of metal handles and power solutions is worth the durability and functionality.
Factor in the NATO rail system. Most RS 3 accessories use the NATO clamp standard. Once you invest in NATO-compatible accessories, they work across the entire DJI RS series. This makes your accessory purchases future-proof as you upgrade gimbals.
FAQs
Is the DJI RS 3 Mini worth it?
Yes, the DJI RS 3 Mini is worth it for content creators and vloggers who need gimbal stabilization in a lightweight, portable package. It supports up to 2kg payloads, features automated axis locks like the full RS 3, and costs significantly less. However, it has a different accessory ecosystem, so RS 3 Mini owners need dedicated accessories rather than full-size RS 3 parts.
Is the DJI RS 3 waterproof?
No, the DJI RS 3 is not waterproof. None of the accessories in this guide are water resistant either. If you shoot in wet conditions, you will need to protect your gimbal and accessories with a rain cover or waterproof housing. Always avoid exposing the electronic components to moisture.
Does the DJI RS 3 have tracking?
Yes, the DJI RS 3 supports subject tracking through the DJI Ronin app when paired with a compatible smartphone. The ActiveTrack feature allows the gimbal to automatically follow a subject. However, tracking accuracy depends on your phone camera and lighting conditions, and it is not built into the gimbal hardware itself.
What is the maximum payload supported by the DJI RS 3?
The DJI RS 3 supports a maximum payload of 3 kilograms or approximately 6.6 pounds. This covers most mirrorless cameras with standard lenses. For heavier cinema camera builds, the RS 3 Pro supports up to 4.5kg. Using the extended quick release plate can help balance heavier setups within the payload limit.
Do DJI RS 2 accessories work with the RS 3?
Many RS 2 accessories work with the RS 3 because both gimbals use the same NATO rail system. Sling handles, dual grips, and monitor mounts that attach via NATO clamp are generally compatible. However, quick release plates and baseplates may differ between models. Always check specific product compatibility before purchasing.
Final Thoughts
The best accessories for DJI RS 3 are the ones that solve real problems in your specific workflow. For most shooters, starting with the SmallRig Sling Handgrip for better handling and a monitor or phone mount for improved framing will give you the biggest immediate upgrade.
Professional users running heavy cinema cameras should prioritize the Extended Quick Release Plate for balancing and the Power Supply Base Plate for all-day shooting. Social media creators cannot go wrong with the DIFESURO Vertical Camera Mount for native portrait content.
The NATO rail system ties everything together. Once you invest in NATO-compatible accessories, they work across the entire DJI RS series, making your purchases future-proof. Build your kit based on what you actually shoot, and your RS 3 will serve you well for years to come.